China IEC 60502 3*185sq mm Copper Core XLPE Insulated Galvanized Steel Wire Armoured Low Voltage Cable, Find details about China 3*185sq Cable, IEC 60502 Cable from IEC 60502 3*185sq mm Copper Core XLPE Insulated Galvanized Steel Wire Armoured Low Voltage Cable
IEC 60502 3*185sq mm Copper core XLPE insulated Galvanized Steel Wire Armoured low voltage Cable
1. Application
The PVC insulated power cable and fire resistant cable are suitable for fixed laying in power transmission and distribution lines with A.C. 50Hz and voltage rating of up to or including 6kv. low voltage 3*185sq mm Cable
2. Scope of PVC cable
Type | No. of Core | Nominal Cross-section of conductor mm2 |
Cu(Al)/PVC/PVC(PE) Cu(Al)/PVC/ATA/PVC(PE) Cu(Al)/PVC/AWAPVC(PE) | 1 | 1.5-1000 |
Cu(Al)/PVC/STA/PVC(PE) | 2, 3, 4, 5 | 1.5-400 |
3+1, 4+1, 3+2 | 2.5-400 |
3. Cross-section area of neutral conductor
In 3+1 core and 3+2 cores should conform to specification of following table:
Nominal Cross-section | Main core | 2.5 | 4 | 6 | 10 | 16 | 25 | 35 | 50 |
Neutral core | 1.5 | 2.5 | 4 | 6 | 10 | 16 | 16 | 25 |
Nominal Cross-section | Main core | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400 |
Neutral core | 35 | 50 | 70 | 70 | 95 | 120 | 150 | 185 |
4. Main technical Characteristics of Cable
1) D.C .Resistance: Conductor resistance of finished cable per kilometer at 20oC is not more than the following:
Nominal Cross-section mm2 | 15 | 2.5 | 4 | 6 | 10 | 16 | 25 |
Cu core | 12.1 | 7.41 | 4.61 | 3.08 | 1.83 | 1.15 | 0.727 |
Al core | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | 1.91 | 1.20 |
Nominal Cross-section mm2 | 35 | 50 | 70 | 95 | 120 | 150 | 185 |
Cu core | 0.524 | 0.387 | 0.268 | 0.193 | 0.153 | 0.124 | 0.0991 |
Al core | 0.868 | 0.641 | 0.443 | 0.320 | 0.253 | 0.206 | 0.164 |
Nominal Cross-section mm2 | 240 | 300 | 400 | 500 | 630 | 800 | 1000 |
Cu core | 0.0754 | 0.0601 | 0.0470 | 0.0366 | 0.0283 | 0.0221 | 0.0176 |
Al core | 0.125 | 0.100 | 0.0778 | 0.0605 | 0.0469 | 0.0367 | 0.0291 |
2) Voltage Test low voltage 3*185sq mm Cable
Each drum of finished cable should withstand power frequency voltage 3.5kv for 5 minutes, the insulation is not breakdown.
3) Service conditions and parameters of cable
The cable is applied to fixed insulation for rated voltage 0.6/1kv of power transportation and distribution line.
The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0oC.
5. Construction
Conductor shaped:RE=circular solid,CC=compacted circular stranded,SM=sector shaped stranded
Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor
Insulation: XLPE (cross-linked polyethylene) rated at 90°C
Colour identification
1 Core : Red or Black
2 Cores : Red, Black
3 Cores: Red, Yellow, Blue
4 Cores: Red, Yellow, Blue, Black
5 Cores: Red, Yellow, Blue, Black, Green
Above 5 Cores: Black Cores with White numerals
Assembly /Inner Sheath :Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted
Armour:Aluminum/Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath:Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request. low voltage 3*185sq mm Cable
Specification
1. 1 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
2. 2 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
3. 3 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
4. 4 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
5. 5 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.
6. 3+1 core: 2.5+1.5mm2, 4+2.5mm2, 6+4mm2, 10+6mm2, 16+10mm2, 25+16mm2, 35+16mm2, 50+25mm2, 70+35mm2, 95+50mm2, 120+70mm2, 150+70mm2, 185+95mm2, 240+120mm2, 300+150mm2, 400+185mm2
7. 3+2 core: 2.5+1.5mm2, 4+2.5mm2, 6+4mm2, 10+6mm2, 16+10mm2, 25+16mm2, 35+16mm2, 50+25mm2, 70+35mm2, 95+50mm2, 120+70mm2, 150+70mm2, 185+95mm2, 240+120mm2, 300+150mm2, 400+185mm2
Products Show
Exhibition:
Certificates
Packaging & Shipping
All cable For exporting are well packed and protected by wooden drum or Wood and Steel Drum.The packing material is depended on the weight and size of cable.The good information, manufacture information, and the client's information is firmly printed on each size of drum.
After the well packed cable drums sent to Sea Port, they are loaded into 20 FT container or 40 FT container. All cable drum are firmly fixed by safety belt to make sure, no movement during the sea freight.
The size of the container is chosed according to weight of total loaded goods or as per the client's requirement.
Shipping Terms | DHL, UPS,FEDEX, TNT, or designated forwarder. |
Payment Terms | T/T, Western Union, or PayPal |
Freight cost | Prepay with goods payment or pay by collected. |
Packaging | Packed in bulk or as request |
Carton Measure | 49*33*23.5cm, 33*30*15cm, 30*30*18cm |