China Wholesale Sale High Quality Ab Glue Adhesive Crystal Clear Casting Epoxy Resin, Find details about China Resin, Coating from Wholesale Sale High Quality Ab Glue Adhesive Crystal Clear Casting Epoxy Resin
item | Ab Glue Epoxy Resin Table for Floor suppliers |
CAS No. | 38891-59-7 |
Other Names | Ab Glue |
MF | (C11H12O3)n |
EINECS No. | 500-033-5 |
Shelf life | 2 Years |
MOQ | 1 KG |
Storage | Cool Dry Place |
Sample | available |
Shape | Liquid |
TC-K128 derives other specifications. After curing with polyamines and polyamides.
TC-K128 has the mechanical properties of invasion, chemical resistance and heat resistance.
PRODUCT PARAMETERS
Main parameters and indexes:
Project | Specifications |
Epoxy equivalent EEW (g / EQ) | 180~190 |
Color (Gardner) | 1.0Max |
Viscosity( cps@25 ºC) | 11000~15000 |
Hydrolyzable (PPM) | 1000↓ |
Flash point (ºC) | 150↑ |
Density (G/ cm3@25 ºC) | 1.16 |
Product description
NPEL-128 is a liquid resin, It is recognized as the standard form which variations have been developed. Cured NPEL-128 always offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc.
Polyester resin property
Property | Value |
Appearance | Clear liquid,no visible mechanical impurity |
Gardner | 1.0 Max |
Epoxy Equivalent (g/eq) | 180~190 |
Density | 1.16g/cm³ @25ºC |
Hydrolytic Chlorine (%) | 1000ppm max |
flash point | 150ºC min |
Viscosity/25ºC (mPa.s) | 11000~15000 |
Typical Applications
Epoxy resin products are mainly used in surface coatings, composites, for material bonding, and insulating materials; also widely used in the national defense, aerospace, road transport, automotive, aircraft, shipping, building construction, and electronics industries, and for electrical engineering, home appliances, telecommunications, energy, and food packaging.
Packaging and Storage
Under certain circumstances, such as low temperature, this product can crystallize after lengthy storage, this can be reversed by warming up to 60-70 ºC while stiming. The product should be stored in a cool and dry place in its original closed packaging, and not be stored exposed to direct sunlight. Under these conditions the self life should be a minimum of 12 months from date of manufacture.
Safety and Handling
Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information please consult the corresponding product Safety Date Sheets.
DISCLAIMER
This information and recommendations contained herein are based upon our date believed to be correct, However, since the condition of use are beyond our control, no guarantee or warranty of any kind of expressed or implied is made with respect to the information contained herein.
1.If the product accidentally gets the eye, how to give first aid?
A:When eyes are contaminated with resin, curing agent or castable, rinse them immediately with clean flowing water for 10 to 15 minutes. See a doctor. First aid materials that are stained or splashed on the skin should be erased, and then the contaminated areas should be cleaned with running water. If you have severe pain or burns, see a doctor. Dirty clothes should be replaced immediately. Remove outdoors immediately because of discomfort caused by inhaling steam. If you have any questions, please ask for medical help.
2.What kinds of packaging do you have?
A:Resin 20kg/barrel or 240kg/barrel, 1.2 tons/barrel, curing agent 20kg/barrel or 240kg/barrel, 1.2 tons/barrel.
3.How to store products?
A:Products should be stored in sealed and tightened original containers in a dry environment of 6-35 degrees Celsius. Under these conditions, the storage period should be based on the date indicated on the label of the storage package (generally valid for three years). After that date, the product will be tested to determine whether it is still valid. If only part of the material in the container is used, it should be sealed and tightened immediately.
4.What test equipment you have ?
A:Pendulum Impact Tester Electrical Universal Testing Machine Horizontal Vertical Combustion Tester Low Temperature Test Chamber High Voltage Scratch Tester Electric Thermostatic Drier DSC Thermal Analyzer Insulation Electrical Performance Test Chamber
5.Could you offer the samples as free?
A:Yes .we can supply the first samples for customers .the quantity need to communicate with customers .The shipping charges need to be paid by customer.
6.How many different kind of epoxy resin you have ?
A:Nowadays we have Thirty different kinds of epoxy resin and we will improved the new epoxy resin .Sometimes ,we can design the material for the customer .
7.If I can't open wenyou internet website ,what should I do ?
A:You can try to open our International website and you also can contact with our sales manager .
8.What is your company capacity ?
A:Normally wenyou production capacity is the best in the domestic .and we can supply 1800 tons one month ,and 20000 tons in one year .
9.what is your deadline time or delivery time ?
A:Normally wenyou delivery time is 7 work days .It is depend on the customers products and requirement and quantity .
10.Do you need the cooperator as a trade office in the world ?
A:Yes .we need the cooperator as the trade in yours local country .If you have the further requirement ,please contact with our trade Representative.