Products

Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/

China Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/, Find details about China Titanium, Titanium Basket from Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/

Trademark
ELEGANT
Specification
customized
Origin
China
Trademark
ELEGANT
Specification
customized
Origin
China
electroplating using titanium anode baskets
 Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/Gr 1 Titanium Anode Basket/ Mmo Coated Mesh Basket for Electroplating/
Titanium wire anode basket general introduction:
Grade 2 titanium is used most widely in the commercially pure titanium.
The density of titanium is 4.506-4.516g/cm3, melting point is 1668 degree, boiling point is 3535 degree. In the appropriate oxidizing environment, titanium also has excellent corrosion resistance. Therefore, titanium products are widely used in aerospace structural materials, such as aircraft, rockets, missiles and spacecraft, ship manufacture, chemical industry, conventional weapons, manufacturing, metallurgical industry, health care, ultra-high vacuum and other fields.
 
Item nameTitanium anode basket
MaterialPure Gr1 or Gr2 titanium
DimensionLength x Width x Thickness
400x120x50mm,500x130x55mm,600x150x55mm,
700x175x60mm, 800x195x60mm,900x215x65mm,
1000x250x65mm,400x120x50mm,500x130x55mm,
600x150x55mm,700x175x60mm,800x195x60mm,
900x215x65mm,1000x250x65mm, 750*40*35mm
200*630*40mm, 250*1150*60mm,  250*700*50 mm, 760*40*105mm,
Or according to customer's design
Mesh Hole Size6*3 mm, 5*4 mm, 8*4mm, 10*5mm, 12.5*4.5mm
Hole shaperhombus or round
Manufacturing methodCut, Bent, Welded
ApplicationsElectroplating industry :
  1. Precious metal plating (Ag, Au, Pd)
2)Hard chrome plating (Cr6+)
3)Base metal plating (Cu, Zn, Ni)
4)Precious metal recovery
Kindly noted1,Titanium basket mouth should be slightly higher level 30-40mm, in order to prevent the outflow of anode residue
 2,Titanium basket end parts should be higher than 100 ~ 150mm (near surface side may consider installing shutters), in order to avoid the lower parts of the current is too concentrated, causing burning
3, Titanium basket should be in close contact with the anode, the anode potential otherwise titanium basket on the sharp rise in the surface of the titanium basket and chlorine evolution occurs oxygen evolution reaction, cause oxidative damage and additives titanium basket
 
 

You Might Also Like