Products

Reclaimed / Natural/ Silicon Rubber Strainer in China

Reclaimed/ Natural/ Silicon Rubber Strainer in China, Find details about China Rubber Strainer, Strainer Machine from Reclaimed/ Natural/ Silicon Rubber Strainer in China

Model NO.
XJL-200
Structure
Vertical
Advantage
Save Mixing Mill Cost
Application
Straining Rubber
Trademark
JUNFAN
Transport Package
Standard Export Package
Specification
XJL-200
Origin
Made in China
HS Code
84778000
Model NO.
XJL-200
Structure
Vertical
Advantage
Save Mixing Mill Cost
Application
Straining Rubber
Trademark
JUNFAN
Transport Package
Standard Export Package
Specification
XJL-200
Origin
Made in China
HS Code
84778000
Reclaimed/ Natural/ Silicon Rubber Strainer in China
Reclaimed/ Natural/ Silicon Rubber Strainer in China
Reclaimed/ Natural/ Silicon Rubber Strainer in ChinaReclaimed/ Natural/ Silicon Rubber Strainer in China
All our machines can be customized according to your requirements.

>>The advantage for the Strainer
1. Compared with the old process, the use of a rubber mixer and workers is reduced, and the production cost is greatly reduced. Moreover, the feeding effect is good and the filtering ability is strong, which greatly reduces the work intensity of the workers and reduces the investment cost.
2. the use of double filter disc head, hydraulic push-pull replacement filter, fast operation, no leakage of glue, save time, effort.
3. the screw speed is adjustable, can match the speed of the front and rear equipment, improve resource utilization, safety and energy saving.
4. It adopts hard-tooth surface reduction box for extruder, which has low noise and long service life.
5. The barrel and screw are made of high-quality alloy steel 38CrMoALA. After quenching and tempering, it is wear-resistant and durable.
6. with automatic cutting rubber device to reduce the labor intensity of workers

>>Brief Introduction of Each Part of this rubber strainer
The machine is mainly composed of a forced feeding mechanism, a screw, a barrel, a filter head, an automatic rubber cutting device, a temperature control system and a transmission device.
Base
The base is an integral welded structure and is machined after annealing.
Motor
The motor uses a variable frequency motor.
Reducer:
Form: With a full hardened gear reducer.
Lubrication method : Spray and splash lubrication
Screw
1) Material: 38CrMoALA, the surface is polished by nitriding, hardness ≥ HV950, hard layer depth ≥ 0.55mm;
2) Structure
a> Throughout the length of the screw, it is a hollow structure to facilitate temperature control.
b> inside the screw, water pressure test for more than 1 hour, no leakage.
Machine barrel
1) barrel material: 38CrMoAlA, inner hole nitriding treatment, hardness HV950 ~ 1000,
Hard layer depth ≥ 0.55mm.
2) The cylinder cooling water channel shall be 10kg/cm2, and the water pressure test for more than 1 hour shall not leak.
Machine head
1) Adopt double-disc hydraulic push-pull structure.
2) Electric cutting rubber.
3) The head cooling water channel shall be 10kg/cm2, and the water pressure test for more than 1 hour shall not leak.
Feeding mechanism
1) Feed motor speed is adjustable, matching the speed of the main motor.
2) The outer body of the feeding port is made of stainless steel.
3) The internal pressure of the feeding rotor is 10kg/cm2, and the water pressure test for more than 1 hour shall not leak.

>>MAIN TECHNICAL SPECIFICATION
ModelXJL-150XJL-200
Diameter of screw 150mm200mm
L/D6.36
Rational speed of screw steam60r/min50r/min
Main Motor Power 45KW75KW
Feeding Material Motor Power5.5KW7.5KW
Steam Pressure0.2--0.4MPa0.2--0.4MPa
Cooling Water Pressure0.2-0.4MPa0.2-0.4MPa
Capacity500 Kg/h900 Kg/h

>> Company Information

1. 40 years on rubber machinery manufacturing and exporting.
2. Delivery within 30 days.
3. Safety wood or plywood crates packaging.
4. Full transportation insurance.
5. Sell to 126 countries on 6 continents.
Reclaimed/ Natural/ Silicon Rubber Strainer in China
>> LAB MACHINES
We had a lot of cooperation with East China University of Technology State Key Laboratory of Chemical Engineering, Qingdao university,Beijing chemical industry research institute ect. and supply the lab rubber machines. 

>>MACHINE LIST
Our company specially manufacturring rubber mixing mill, rubber vulcanizing press( frame type, four column type and lab press), rubber kneader and tire recycling line.

Reclaimed/ Natural/ Silicon Rubber Strainer in China
>> AFTER SERVICES FOR THE PRESS
1. The above machines are all passed inspection of 3~5 hours of full load operation before leaving the factory, you can use it directly thus saving the time of test-run and expense.
2. Warranty: 12 months after installation, if our machines have any problems, you can feel free contact me, we will solve it as soon as possible, and give you the best services.

Delivery Demonstration
Reclaimed/ Natural/ Silicon Rubber Strainer in China
Reclaimed/ Natural/ Silicon Rubber Strainer in China
Some Customer Visit and Exhibition Pictures
Reclaimed/ Natural/ Silicon Rubber Strainer in China
Reclaimed/ Natural/ Silicon Rubber Strainer in ChinaReclaimed/ Natural/ Silicon Rubber Strainer in China
Reclaimed/ Natural/ Silicon Rubber Strainer in China
>>FAQ
1. Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
From engineer designing to production completion, it needs about 25 to 35 days.
2. What does your factory do regarding quality control?
We pay much more importance to quality control from the very beginning to the end of production.
Every machine will be fully assembled and carefully tested before shipment.
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
Small machine usually takes within 2~3 days.
Big plant usually takes about 30 days.
5.How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
The core of our company culture is innovation,quality,integrity and efficiency. Also we have had many good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're the user around us.
6.How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao liuting airport.
We will pick up you at the airport.

You Might Also Like