Products

24V Flex Neon Light for Outdoor Building Decoration

China 24V Flex Neon Light for Outdoor Building Decoration, Find details about China 24V Neon Flex Light, Blue Neon Flex Light from 24V Flex Neon Light for Outdoor Building Decoration

Model NO.
VSN-24V-2W
LED Quantites
120LED/M
Size
15*25mm
Material
PVC Tube+Copper Wire+SMD
Cut Internals
1meter
Input Voltage
96V~240V
Working Voltage
220V/110V/24V
IP Rate
IP54
Usage
Indoor, Outdoor
Warranty
1year
Trademark
Vision
Transport Package
Carton, Can Be Customized as Request
Specification
CE&ROSH
Origin
Zhongshan City, Guangdong Province, China
HS Code
940530000
Model NO.
VSN-24V-2W
LED Quantites
120LED/M
Size
15*25mm
Material
PVC Tube+Copper Wire+SMD
Cut Internals
1meter
Input Voltage
96V~240V
Working Voltage
220V/110V/24V
IP Rate
IP54
Usage
Indoor, Outdoor
Warranty
1year
Trademark
Vision
Transport Package
Carton, Can Be Customized as Request
Specification
CE&ROSH
Origin
Zhongshan City, Guangdong Province, China
HS Code
940530000


                                  
Product Features:
 LED Neon Flex 

Light Source:SMD2835/SMD5050
Brightness :Hight bright

Material:PVC milky tube,copper wire,SMD leds
Power cable:Enviromental Rubber/PVC

Size:15x25mm/9x20mm/8x17mm/8x14mm
Light type:double side/single side

Certification:CE, RoHS,IS9001
IP Rate:IP54(outdoor)

LED color :R/Y/B/G/W/WW/P/RGB		-20°~60°

96~240V

12~24V

led Quantities:120leds/meter   (RGB60leds/meter)
led quantities: 112led/meter  (RGB 60leds/meter)

Cuting distance:1M/cut
Cuting distance:2.5CM/50CM/100CM(customizable)

Max connect:50meters
Max connect:20meters



Read more :
http://vision-lighting.en.made-in-china.com/product-group/kqcJCrdKrpVW/LED-Neon-Flex-catalog-1.html



24V Flex Neon Light for Outdoor Building Decoration


24V Flex Neon Light for Outdoor Building Decoration
24V Flex Neon Light for Outdoor Building Decoration


Application:
Street ,Shop, hotel, park, theme party, window display, holiday,christmas ,wedding etc. 



Installations steps:

Connecting power cord

1) Slide locking nut end of led neon flex.
2) Push power connector into cut end ,making sure pins on power.
3) Connector line up with wire points of led neon flex .
4) Screw locking nut onto connector .

Connecting splice connectors

1) To lengthen or join two pieces together, use a splice connector and two locking nuts .
2) Push splice connector into led neon flex, making sure the pins line up with the wire pins  
3) Splice connectors as far as it will go .

Connecting end caps 

1) Drop the silicon glue into end cap ,and put the end cap with the end part of led neon flex , to prevent water .
2) Cover end caps with heat-tube ,dry it , to double confirm preventing water .


Safety warning :

1) The led neon flex must only be cut very accurate on the indicated mark , use shears or        sharp scissors .If it is wrongly cut ,damaged sections should be discarded .
2) Do not plug into power source when led neon flex is being installed.
3) Do not knock on or haul it hardly while it is in use.
4) Its voltage must the same as power source.
5) When connecting separate lengths .make sure the connectors are tightly connected together.
6) End cap must be pushed all the way into the led neon light.
7) When assembling the connectors, the front ends must be bent leftwards, then rightwards , the    extra wires should be cut off diagonally with nippers to avoid short-circuit .
8) Use specified controllers only.
9) To avoid fire and shock hazards, o not use when outer insulation is damaged.





FAQ:

Cutting mistakes:

When rope light was cut wrong, the unit near the cut break can't work .And this unit will be hard to be repaired .In this case, just cut away this unit and the left parts still work .

Wire touches:
When connecting place get short circuit and smoking ,it must the wire get touching. When cut the rope, please clean extra copper wire and do not let them get touch.
In this case, ust cut the smoking unit and the left parts still work .

Opposite direction: 
When putting "+" and "-" in the opposite direction ,the rope light won't work .In this case ,just correct the direction and it will work .For example , if one end of with power cord does't work ,then change the other end of neon flex tube to connect with power cord .

24V Flex Neon Light for Outdoor Building Decoration
 

You Might Also Like