Products

Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz

China Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz, Find details about China Multi Tank Ultrasonic Cleaning Systems, Ultrasonic Cleaner for Vehicle Radiators from Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz

Model NO.
OKS-DQXJ-1042
Customized
Customized
Feature
Clean Thoroughly
Type
Ultrasonic Cleaner for Removing Oil/Dirt
Power
3000watt
Heater
Have
Frequency
20K, 25K,28K,33K,40K Choose One
Voltage
110V-240V, 50Hz-60Hz AC
Tank
Stainless Steel Single Bath
Transport Package
Wooden Packing
Origin
Tianjin, China
HS Code
8543709990
Model NO.
OKS-DQXJ-1042
Customized
Customized
Feature
Clean Thoroughly
Type
Ultrasonic Cleaner for Removing Oil/Dirt
Power
3000watt
Heater
Have
Frequency
20K, 25K,28K,33K,40K Choose One
Voltage
110V-240V, 50Hz-60Hz AC
Tank
Stainless Steel Single Bath
Transport Package
Wooden Packing
Origin
Tianjin, China
HS Code
8543709990
Ultrasonic cleaning at higher frequencies creates an abundance of minute vacuum bubbles which allow for cleaning to occur. These bubbles implode on and inside surgical device surfaces in a process defined as cavitation. This micromechanical scrubbing action is able to reach small crevices, irregular surfaces, and internal passages to ensure proper and consistent cleaning.

Ultrasonic Cleaning for Automotive Engine Parts
Replacing the old hectic ways of cleaning…
These days' ultrasonic cleaners for car engine are widely used for cleaning any shape and size of car engine. With the advent of these industrial cleaners, the old fashioned solvent cleaners used in yesteryear's neighborhood garages are completely replaced.
Probably you can recall how mechanics used to hold the engine under the faucet and practically scrubbing away the grease, oil, lubricant and other contaminants on the automotive components.
But now, with the help of ultrasonic cleaners, all the repairmen needs to do is - dissemble the car engine parts and place them in an ultrasonic cleaner tank for cleaning them efficiently and fast.
The magic of ultrasound waves works faster, much more safely and efficiently for cleaning the engine parts. Moreover it consumes far lesser amount of time than it takes with traditional hand scrubbing of the engine parts.
Overall, these cleaners are the best alternative if you want to speedily get rid of heavy built up grease or badly choked up engine parts. Not only for cleaning car engine parts, but it can be even used for cleaning aircraft and marine engine parts.

OKSSONIC Ultrasonics manufactures large ultrasonic cleaners for the cleaning of heavy and big components with light or heavy contamination. Large tanks are usually required to clean parts such as:
Plastic Injection Molds
Aerospace components
Large batches of smaller parts
Bulk rebuilding of firearms
Heat Exchangers
Engine blocks

Configuration parameters:
Use high-quality vibrator, strong output.
The tank body is made of stainless steel SUS304, which is durable.
Cartridge-type stainless steel heating tube, EGO temperature control, high heating efficiency.
It is an excited generator with stable performance and strong output.
The ultrasonic power is adjustable from 0 to 100%, and a stainless steel drain ball valve is installed.

Q. "Will ultrasonic cleaning remove the contaminants on my parts?"
A. The answer to this question relies almost entirely on the bond strength between the part, and the contaminant. If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it. However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it. This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
 
Q. "Which ultrasonic frequency would be most appropriate for my application?"
A. This depends upon many factors, including part size, contaminant, material of construction of the part, and others. Traditionally, the heavier the part, the lower the ultrasonic frequency in use. The more detailed the part, the higher the frequency which should be used. This is one of the advantages of our ultrasonic cleaner, which includes more than 1 frequency in the same tank. allows us to provide scrubbing power, without sacrificing penetration and detailed scrubbing action.
 
TypeInternal size
L*W*H (mm)		Outsize mm
L*W*H (mm)		Frequency (Khz)Power(W)Heating(W)Total power(W)voltage
OKS-DQXJ-1006280×210×210320×250×35020,28,33,40,80,13030010001300220V
OKS-DQXJ-1012400×310×280520×430×60020,28,33,40,80,13060030003600220V
OKS-DQXJ-1018490×360×320610×480×67520,28,33,40,80,13090030003900220V
OKS-DQXJ-1024630×430×320740×550×67520,28,33,40,80,130120040005200220V
OKS-DQXJ-1030630×530×320750×650×67520,28,33,40,80,130150040005500220V
OKS-DQXJ-1036680×530×360800×650×70020,28,33,40,80,130180050006800220V
OKS-DQXJ-1040680×570×400830×710×73520,28,33,40,80,130200050007000220V
OKS-DQXJ-1041730×570×450880×710×73520,28,33,40,80,130240060008400220V
OKS-DQXJ-1042790×670×510940×765×78520,28,33,40,80,130300060009000380V
OKS-DQXJ-1043850×770×570990×820×78520,28,33,40,80,1304000700011000380V
OKS-DQXJ-1044910×820×6201050×880×84020,28,33,40,80,1305000700012000380V
OKS-DQXJ-1045960×870×6801100×940×92020,28,33,40,80,1308000800016000380V
OKS-DQXJ-10461100×930×7301160×1000×98020,28,33,40,80,13010000800018000380V
Welcome OEM size enquire

Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz
Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz

You Might Also Like