28K 2000W Ultrasonic Carburetor Cleaning Machine for Auto Parts Cleaner Machine with Stainless Steel Basket
China 28K 2000W Ultrasonic Carburetor Cleaning Machine for Auto Parts Cleaner Machine with Stainless Steel Basket, Find details about China Medical Industry Ultrasonic Washing Solution, Ultrasonic Cleaner Medical Instruments from 28K 2000W Ultrasonic Carburetor Cleaning Machine for Auto Parts Cleaner Machine with Stainless Steel Basket
Basic Info.
Model NO.
OKS-DQXJ-1040
Customized
Customized
Feature
Clean Thoroughly
Type
Ultrasonic Cleaner for Removing Oil/Dirt
Power
2000watt
Heater
Have
Frequency
20K, 25K,28K,33K,40K Choose One
Voltage
110V-240V, 50Hz-60Hz AC
Tank
Stainless Steel Single Bath
Transport Package
Wooden Packing
Origin
Tianjin, China
HS Code
8543709990
Model NO.
OKS-DQXJ-1040
Customized
Customized
Feature
Clean Thoroughly
Type
Ultrasonic Cleaner for Removing Oil/Dirt
Power
2000watt
Heater
Have
Frequency
20K, 25K,28K,33K,40K Choose One
Voltage
110V-240V, 50Hz-60Hz AC
Tank
Stainless Steel Single Bath
Transport Package
Wooden Packing
Origin
Tianjin, China
HS Code
8543709990
Product Desciption
Ultrasonic cleaning at higher frequencies creates an abundance of minute vacuum bubbles which allow for cleaning to occur. These bubbles implode on and inside surgical device surfaces in a process defined as cavitation. This micromechanical scrubbing action is able to reach small crevices, irregular surfaces, and internal passages to ensure proper and consistent cleaning.
This machine is a special equipment for cleaning magnetic materials according to the characteristics of the magnetic material industry and the advantages of the cleaning industry at home and abroad. The machine has the following Characteristics: the equipment is compact and reasonable, the shape is beautiful, the machine can be used directly with the grinder, and it can be used independently. Rust steel is made, the transmission is stable and reliable, the transmission net uses special stainless steel strip mesh belt, it has long service life, and can be repaired and adjustable speed (variable frequency speed regulation).
Ultrasonic cleaning uses the upper and lower radiation technology, and increases the ultrasonic power and the ultrasonic area length, so that the cleaning effect is more obvious. Drying is done by circulating hot air drying, drying oven temperature automatic control, energy saving, cleaning and drying at one time, reducing production process, and can be directly packed.
Q. "Will ultrasonic cleaning remove the contaminants on my parts?"
A. The answer to this question relies almost entirely on the bond strength between the part, and the contaminant. If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it. However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it. This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
Q. "Which ultrasonic frequency would be most appropriate for my application?"
A. This depends upon many factors, including part size, contaminant, material of construction of the part, and others. Traditionally, the heavier the part, the lower the ultrasonic frequency in use. The more detailed the part, the higher the frequency which should be used. This is one of the advantages of our ultrasonic cleaner, which includes more than 1 frequency in the same tank. allows us to provide scrubbing power, without sacrificing penetration and detailed scrubbing action.
This machine is a special equipment for cleaning magnetic materials according to the characteristics of the magnetic material industry and the advantages of the cleaning industry at home and abroad. The machine has the following Characteristics: the equipment is compact and reasonable, the shape is beautiful, the machine can be used directly with the grinder, and it can be used independently. Rust steel is made, the transmission is stable and reliable, the transmission net uses special stainless steel strip mesh belt, it has long service life, and can be repaired and adjustable speed (variable frequency speed regulation).
Ultrasonic cleaning uses the upper and lower radiation technology, and increases the ultrasonic power and the ultrasonic area length, so that the cleaning effect is more obvious. Drying is done by circulating hot air drying, drying oven temperature automatic control, energy saving, cleaning and drying at one time, reducing production process, and can be directly packed.
Q. "Will ultrasonic cleaning remove the contaminants on my parts?"
A. The answer to this question relies almost entirely on the bond strength between the part, and the contaminant. If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it. However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it. This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
Q. "Which ultrasonic frequency would be most appropriate for my application?"
A. This depends upon many factors, including part size, contaminant, material of construction of the part, and others. Traditionally, the heavier the part, the lower the ultrasonic frequency in use. The more detailed the part, the higher the frequency which should be used. This is one of the advantages of our ultrasonic cleaner, which includes more than 1 frequency in the same tank. allows us to provide scrubbing power, without sacrificing penetration and detailed scrubbing action.
| Type | Internal size L*W*H (mm) | Outsize mm L*W*H (mm) | Frequency (Khz) | Power(W) | Heating(W) | Total power(W) | voltage |
| OKS-DQXJ-1006 | 280×210×210 | 320×250×350 | 20,28,33,40,80,130 | 300 | 1000 | 1300 | 220V |
| OKS-DQXJ-1012 | 400×310×280 | 520×430×600 | 20,28,33,40,80,130 | 600 | 3000 | 3600 | 220V |
| OKS-DQXJ-1018 | 490×360×320 | 610×480×675 | 20,28,33,40,80,130 | 900 | 3000 | 3900 | 220V |
| OKS-DQXJ-1024 | 630×430×320 | 740×550×675 | 20,28,33,40,80,130 | 1200 | 4000 | 5200 | 220V |
| OKS-DQXJ-1030 | 630×530×320 | 750×650×675 | 20,28,33,40,80,130 | 1500 | 4000 | 5500 | 220V |
| OKS-DQXJ-1036 | 680×530×360 | 800×650×700 | 20,28,33,40,80,130 | 1800 | 5000 | 6800 | 220V |
| OKS-DQXJ-1040 | 680×570×400 | 830×710×735 | 20,28,33,40,80,130 | 2000 | 5000 | 7000 | 220V |
| OKS-DQXJ-1041 | 730×570×450 | 880×710×735 | 20,28,33,40,80,130 | 2400 | 6000 | 8400 | 220V |
| OKS-DQXJ-1042 | 790×670×510 | 940×765×785 | 20,28,33,40,80,130 | 3000 | 6000 | 9000 | 380V |
| OKS-DQXJ-1043 | 850×770×570 | 990×820×785 | 20,28,33,40,80,130 | 4000 | 7000 | 11000 | 380V |
| OKS-DQXJ-1044 | 910×820×620 | 1050×880×840 | 20,28,33,40,80,130 | 5000 | 7000 | 12000 | 380V |
| OKS-DQXJ-1045 | 960×870×680 | 1100×940×920 | 20,28,33,40,80,130 | 8000 | 8000 | 16000 | 380V |
| OKS-DQXJ-1046 | 1100×930×730 | 1160×1000×980 | 20,28,33,40,80,130 | 10000 | 8000 | 18000 | 380V |
| Welcome OEM size enquire | |||||||
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover