China Ethernet Over Coax Cable Modem Eoc Slave with WiFi, Find details about China Eoc Slave, Eoc Master from Ethernet Over Coax Cable Modem Eoc Slave with WiFi
EOS-204W is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.
EOS-204W is the slave with 4 Ethernet ports and WIFI
EOS-204W is based the Qualcomm chipset solution,with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The PHY Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs.
EOS-204W is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.
Features
1. Based on HomePlug AV solution and Qualcomm chipset
2. 7.5-65Mhz frequency for EOC signals., no influence on CATV Service
3. PHY Layer speed 600Mbps
4. Support data encryption
5. 4 100M auto-negotiation Ethernet port
6. Support the isolation of slave under one master
7. Support Port-based VLAN and 802.1q VLAN
8. Support bandwidth limited
9. Support QOS configuration based on slave port or VLAN.
10. Support broadcast storm control.
11. Support data packages count
12. Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on.
13. Support WEB,CLI and SNMP management
14. Support on-line upgrading
SpecificationItem | Parameters | EOS-204W |
Interface & indicator | RF interface | 1*TV(RF signal) OUTPUT, metric F connector 1*CABLE(MIX)INPUT, metric F connector |
Ethernet interface | 4*10/100M auto-negotiation, RJ45 | |
Power interface | 1*DC12V power supply interface | |
LED indicators | 1 x power indicator 1 x system indicator 1 x CABLE indicator 1 x WIFI indicator LAN indicator(each Ethernet port has 1 indicator) | |
Performance parameters | RF parameters | Frequency:7.5-65MHz Output level:110±5dBuv |
Receive sensibility:45dBuv Return loss:>15dB Output impedance:75Ω | ||
Transmission | PHY Layer:600Mbps Throughput on MAC Layer:320Mbps | |
Modulation Mode | OFDM- 2690-carriers 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO | |
Working Mode | TDMA/CSMA | |
Encryption Mode | AES-128 | |
Standard | EOC Standard | IEEE P1901(Draft) HomePlug AV |
Ethernet Standard | IEEE 802.3, IEEE 802.3x, IEEE 802.3u IEEE802.1P, IEEE802.1Q | |
Software | Network Management | WEB, CLI, SNMP |
Software Features | VLAN, QOS, Bandwidth Control, Broadcast storm limitation | |
Physical Features | Power supply & Consumption | Power adapter:12VDC 1A Power consumption:<8W |
Dimension | 160×120×32mm | |
Weight | 0.5kg | |
Environment Attribute | Work temperature:0~50ºC Stock temperature:-40~85ºC Work humidity:10%~90%, non-condensation Stock humidity:10%~90%, non-condensation |