Products

Asenware 2 Wire Conventional Smoke Fire Alarm Detector

China Asenware 2 Wire Conventional Smoke Fire Alarm Detector, Find details about China Fire Alarms, Conventional Fire Alarm from Asenware 2 Wire Conventional Smoke Fire Alarm Detector

Model NO.
AW-CSD311
Infrared Sensor Installation
Ceiling
Zones
1-32
Power Supply
110VAC/240VAC
Battery
12V2ah*2
Fire Relay Output
Nc and No
Fault Relay Output
Nc and No
Sounder Output
2 Circuits
Trademark
Asenware
Transport Package
EPE Inside, Carton Outside
Specification
CE, iso
Origin
Guangdong, China
HS Code
853110000
Model NO.
AW-CSD311
Infrared Sensor Installation
Ceiling
Zones
1-32
Power Supply
110VAC/240VAC
Battery
12V2ah*2
Fire Relay Output
Nc and No
Fault Relay Output
Nc and No
Sounder Output
2 Circuits
Trademark
Asenware
Transport Package
EPE Inside, Carton Outside
Specification
CE, iso
Origin
Guangdong, China
HS Code
853110000
Asenware 2 Wire Conventional Smoke Fire Alarm Detector

Introduction:
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.

Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.

The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.

Operating Voltage Range9 to 28 VDC Volts Non-polarized
Standby Current≤120μA@24VDC
Maximum Alarm Current (LED on)

≤15mA@24VDC
(1K Ohm current-limiting resistance)

Operating Humidity Range≤95%RH(40°C±2°C) Relative Humidity, Non-condensing
Operating Temperature Range-10°C to 50°C (14°F to 122°F)
Smoke Alarm Sensitivity1.06±.26%FT
Fix temperature Alarm57°C (135°F) A1R
Rate of rise Alarm7.1°C/5S A1R
Height48.2 mm installed in Base
Diameter99.45 mm

Our company
Asenware, manufacturer of fire alarm and fire suppression system since 2005. Our headquarter is in London, UK, with factory Shenzhen, China
We keep our best service for our customers, and have a rich experienced engineer team to design and install for overseas projects.


Product range:
1. Addressable fire alarm system(FP100 series,2189,2100 series)
2. Conventional fire alarm system(2166 series)
3. FM200 gas fire suppression system
4. Emergency light system
5. Fire pump system
6. Fire hose and fire hose reel cabinet
Aw-CSD311 Asenware Conventional Fire Alarm Smoke Detector
 

Contact us
Asenware Ltd
Address:701, Bd 8, Dongfangming Industry Zone, Dabao Rd., Baoan, Shenzhen, China, Zip Code :518101
Phone number: +86(0) 0755-27663815
Company website: http://asenware.en.made-in-china.com

You Might Also Like