Systems composition

The printing system of Kyocera PH is an industrial level digital four-color printing engine system,it mainly used for packaging and printing industry, which is equipped with 12 pics industrial levels Kyocera PH.

Kyocera nozzle can print at high speed with high precision,4 colors 600 * 1200dpi, and the maximum printing speed can be reach 50m / min.

Features of the system

1.High resolution: 12 pics industrial grade Kyocera PH,UV/water-based nozzles (printing width 324mm) are used in the standard configuration, the printing precision reaches 600 * 1200dpi.

2.High speed: Industrial single pass non-contact printing technology, and the speed up to 50m / min (600dpi) when 4-color printing.

3.Maximum printing width: 324mm.

4.Suitable for a wide variety of materials and variable printing contents: all kinds of paper/adhesive labels can be printed perfectly without pre coating.Supported various variable barcodes and 2D barcode printing.Also support complete variable image printing.

5.Color support: CMYK four colors, or more customized spot colors accepted.

6.New Rolls operation time: the average preparation time for printing is less than 1 minute, seamless changing rolls or printing content changing,one pic information one printing.

7.Software configuration: equipped with powerful intelligent Rip, image processing and data transmission technology, which greatly facilitates the daily proofing and color correction.The efficiency of drawing and image performance are greatly improved.

8.Simple and easy to use: it can be printed directly on the computer without traditional tedious processes such as plate making, hanging plate and color matching.

9.Material requirements: without pre coating, it can print high-quality patterns directly on all kinds of paper/Adhesive labels.

10.Automatic processing unit: automatic ink supply, automatic air supply balance. The intelligent ink supply system can still maintain the negative pressure and keep the negative pressure when the main engine suddenly power loses.The system is working normally, and it will be working quickly when power back.
 

11.Reliability and working life: the whole series of digital printing equipment is designed base on 24* 7Hrs-production and operation mode.

12.And various durable components to reach the industrial production requirements, especially the Kyocera industry gray-grade piezoelectric nozzles.

System specifications and parameters

PH parameters

1.Nozzle model:Kyocera
2.Printing width of unit nozzle: 108mm
3.Number of nozzles:2656
4.Single nozzles density:600dpi
5.Nozzle ink drop (minimum):3.5pl, 7pl, 11pl, 14pl is adjustable
6.Grayscale supports:8 levels

7.Nozzle size:200L * 30W * 69.4H

8.Nozzle frequency: single point 35kHz, maximum 40KHz
9.Driving voltage:24 ±1V
10.Nozzle temperature:15 to 45ºC

11.Standard ink viscosity:5.0-6.0mpa * s

Parameters of printing control system
1.Printing software:variable data software or graphic output software.
2.The secondary development software:provides the interface to support the secondary development, and optionally supports the connection detection.
3.Dot control:software supports CMYK two bit dot Rip.

4.It supports nozzle temperature, voltage adjustment, without changing the driving waveform. Supports waveform encryption.

5.Color curve editing:can support color curve calibration.
6.The printing module is equipped with 4 color printing units, and each color unit is composed of 3 nozzle modules.

7.1 set of main control box (including 9u main box (communication control board, ink gas path control board), ink supply box, gas path box, etc.)

8.High precision printing mode 50m/ min (600x1200dpi, two dots, base on material / resolution / environment / platform and other factors)

9.Interface type:USB3.0 and optical fiber data transmission, additional LAN or CAN interface can be provided for equipment connection.

10.All connectors can be plugged in and out independently.

11.The computer is equipped with high-performance i7 processor, 8g memory, 2TB hard disk, 2G independent graphics card, two USB3.0 interfaces, win7.64bit

Other technical parameters

UV DOD Digital Inkjet Printer