Introduction:

Non-Combustibility Tester measures incombustibility and combustibility of uniform building material and non-uniform building material of actual element.

The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of a specimen.

It fully satisfies KS F 2271, KS F ISO 1182 and ISO 1182 as international standards in the same time.

This equipment uses a module type temperature controller to be stable over 60 minutes in the furnace condition of 750±5ºC and meets precise test result.

And another advantage is the automatic up-down specimen movement device for accurate results as well as a user-friendly process. Thus, it doesn't matter who is test-users.

RS 232C communication and Data Acquisition Board is able to be accurate Interface of test values, so user can test the whole function and test by PC easily and automatically.

Application:

* Building Materials

* Rail

* IMO

Standards:

1. ISO 1182: Reaction to fire test for building material---Non-combustibility test

2. BS 476-4 : Fire Tests on Building Materials and Structures.. Part 4: Non-Combustibility Test for Materials

3. BS 476-11: Fire tests on building materials and structures - Part 11: Method for assessing the heat emission from building materials.

4. KS F ISO 1182: Method of a non-combustibility test of building products

5. KS F 2271: a Testing method for incombustibility of internal material and element of building
 

Feature:

1.  Single Zone Furnace operable at up to 900 ºC with the NIKROTHAL Ribbon Heater

2.  750±5ºC temperature auto control with TPR

3.  Furnace facilitating maintenance and replacement

4.  Up/down automatic moving system for correct positioning of test sample and user's convenience

5.  Mirror to observe the ignition quality of test sample

6.  RS 232C communication and DAQ Board-adopted interface   

7.  Auto testing by DAQ Board and PC

8.  Alarm temperature-based over current shut-off system for user's safety

9.  Software (Non-Comb 2005) to print out reports based on exact data result and each standard

Test Result:

* Mass Loss(g) and Rate(%)

* Ignition Time(s) and Sustained Flaming(s)

* Initial & Maximum Furnace Temperature(ºC)

* Final Furnace Temperature(ºC)

* Maximum Specimen Center Temperature(ºC)

* Final Specimen Center Temperature(ºC)

* Furnace Temperature Rise(ºC)

* Specimen Center & Surface Temperature Rise(ºC)

* Differential Test Result by Standards

(ISO 1182:1990, KS F ISO 1182: 2004, IMO FTPC Pt.1: 1998, KS F 2271: 1998) 

Specifications: