Products

Plastic Pressure and Vacuum Forming Machine Equipment

China Plastic Pressure and Vacuum Forming Machine Equipment, Find details about China Plastic Pressure and Vacuum Forming Machine, Plastic Vacuum and Pressure Forming Machine from Plastic Pressure and Vacuum Forming Machine Equipment

Model NO.
LX3122HF-IM-C332
Dry Run Speed
40cycles/Min Max.
Film Thickness
0.2-2mm
Sheet Width
800mm Max.
Suitable Material
PP PS Pet PVC BOPS
Air Pressure
0.7MPa
Production Range
Container, Clamshell ,Tray and Lid
Automaticity
Forming, Cutting, Stacking and Conveying
Cooling Water Consumption
13 Liters/Min 15° - 20°c
Trademark
LXPLASTICS
Transport Package
Plastic Film with Anti-Rust Oil
Specification
1200*2600*2500mm
Origin
China
HS Code
8477409000
Model NO.
LX3122HF-IM-C332
Dry Run Speed
40cycles/Min Max.
Film Thickness
0.2-2mm
Sheet Width
800mm Max.
Suitable Material
PP PS Pet PVC BOPS
Air Pressure
0.7MPa
Production Range
Container, Clamshell ,Tray and Lid
Automaticity
Forming, Cutting, Stacking and Conveying
Cooling Water Consumption
13 Liters/Min 15° - 20°c
Trademark
LXPLASTICS
Transport Package
Plastic Film with Anti-Rust Oil
Specification
1200*2600*2500mm
Origin
China
HS Code
8477409000
 
Plastic Pressure and Vacuum Forming Machine Equipment
 

BRIEF

HF-IM plastic pressure and vacuum forming machine is a trim-in-place type thermoforming machine which takes advantage of mould with rules steel knife for performing forming and cutting in the same station. and the second and the third cut-station are available for performing fuction of post-trim and hole-punch.
 
it is perfect for making part of PP PET PS etc and completely automatically produces disposable rectangular or square or round shaped roll-edged containers and trays with forming, trimming, and stacking conveying on one operation cycle.  

 

Design Feature

plastic pressure and vacuum forming machine Use Steel-Rule-knife for performing forming and cutting in the same station
Trim-in-place for processing PP PET PS PVC BOPS material etc. specially perfect for PP .
Second cut-press and Third cut-press are available for hole punching and post-trim
Automatic stacking ,counting unit and conveying system
Trim-in-place for parts with rolled edge (turn-down lip)
Technology of trim-in-place brings a neat and identical trimming(cutting) 
Plug assistant for deep forming of draw
Floating knife and free knife are available for post-trimming film with high shrinkage rate.
Extra Contact Heat plate for Minimizing power consumption is available. 


 
SpecificationLX3122IM
Mould Area 800*600mm Max 
Depth of Draw under sheet 120 mm Max 
Depth of Draw above sheet 30mm Max/120mm Max
Clamping force750KN
The Second Cut-PressAvailable
The third Cut-PressAvailable
Suitable materialPP PET PS PVC BOPS
Sheet Width460- 850 mm
Material Thickness Range0.2-1.5mm
Material Roll Diameter1000 Max
Dry run Speed45cycles/min  Max.
Power Supply3-N AC380V±15V  ,(others at request)
Power ConsumptionApprox.35kilowatts/hr
Air Pressure0.7Mpa
Air Consumption2500 Liters/min
Cooling Water Consumption13 Liters/min 15° - 20°C
Dimensions9.5m*2.2m*2.2(L*W*H)
 
 
 
Trim-in-place  IM-2in1
Plastic Pressure and Vacuum Forming Machine Equipment
 
 Trim-in-place with second cut-press  IM-3in1 (optional)
Plastic Pressure and Vacuum Forming Machine Equipment
 
 
Trim-in-place with second cut-press and third cut-press IM-4in1 (optional)
Plastic Pressure and Vacuum Forming Machine Equipment
 
   Service
Plastic Pressure and Vacuum Forming Machine Equipment

Plastic Pressure and Vacuum Forming Machine Equipment
 

 

You Might Also Like