Products

5% Borated Polyethylene Neutron Shielding Boards

China 5% Borated Polyethylene Neutron Shielding Boards, Find details about China Borated PE Sheet, Polyethylene from 5% Borated Polyethylene Neutron Shielding Boards

Model NO.
XX-016
Trademark
Xinxing
Transport Package
40
Specification
any size
Origin
China
HS Code
3920109090
Model NO.
XX-016
Trademark
Xinxing
Transport Package
40
Specification
any size
Origin
China
HS Code
3920109090
5% borated Polyethylene neutron shielding boards

Product Description
5% Borated Polyethylene is manufactured to meet all applicable applications for industrial use, shielding applications, medical applications (with regards to cancer treatment), vaults, and doors for linear particle accelerators. Borated Polyethylene is effective shielding for support in all areas of security, i.e., seaports, airports, border protection and other applications requiring attenuation of thermal neutrons. The important factor is the Hydrogen Level in the PE. Our 2" & 3" thick have higher levels than the 1".
5% Borated Polyethylene Neutron Shielding Boards

5% Boron by weight to shield neutrons, are boron loaded PE(U)HMW grades. The high hydrogen content of PE (U)HMW makes it very suitable for slowing down fast neutrons to lower energy thermal (slow) neutrons, which are then absorbed by the added boron compound.
Whereas both PE-HMW and PE-UHMW are suitable for neutron shielding, PE-UHMW is often preferred because of its better deformation behaviour at high temperatures and its superior impact strength and wear resistance.

Borated PE Products:
 1.5% Boron ,   3% Boron,  5% Boron, 10% Boron , 15%Boron

Size:

All size could be supplied by customers' requirement


 Product performance
PropertiesUnitsASTMNominal Values
Densityg/ccD15051.04
Tensile Strength @ Yieldp.s.i.D638>1,400
Elongation @ Break%D638>20%
Flexural Modulusp.s.i.D79065,000
DurometerShore DD224070
Tensile Impactft.lbs./in.2D182299
Vicat SofteningºFD1525192º
Heat Deflection Temp.
66p.s.i.		ºFD648183º

h5% Borated Polyethylene Neutron Shielding Boardsospital

Advantage: 

1,Have good irradiation resistance,

2,No activation products, secondary gamma ray energy is low;

3,Good chemical stability, corrosion resistance, non-toxic, no smell.

4,High mechanical strength, smooth surface, easy to facilitate decontamination, mechanical processing, the characteristics of easy installation and maintenance

5, 5% Boron by weight

6, Replaces lead in nuclear shielding applications

7, Lighter weight and lower cost than lead


5% Borated Polyethylene Neutron Shielding Boards

How Can I Fabricate and Finish it?
Use standard woodworking tools: table saws, table routers, drills, blades and bits. Carbide router bits with two to four flutes are recommended.

How to Care and Store?
  • Store the sheets flat on a level surface
  • Keep away from teak oil and other products that can stain the finish
  • Use china markers or water-based markers to draw patterns
  • Pen marks can usually be removed with household cleaners
  • Keep away from heat sources that exceed 180°F
  • Because there is no grain, parts can be cut from any area of the sheet
  • Save the scraps for small parts, shims, spacers and plugs
5% Borated Polyethylene Neutron Shielding Boards
What are common applications?
  • Airport Security and Sea Port Security
  • International Border Security
  • Doors for Linear Accelerators
  • Medical Vaults 
  • Nuclear-Powered Vessels
  • Research Applications

Can I use a CNC machine?
Yes.

Will the material produce dust when fabricating?
No, only small shavings.
5% Borated Polyethylene Neutron Shielding Boards
 

You Might Also Like