Toynol® DS-197 organic blue pigment dispersing agent
CharacteristicsHigh performance dispersing agents in water-based system
Good wetting effect to pigment and fillings
Outstanding deflocculation
Provide powerful charge repulsion property
Suitable for various powder
Specially suitable for organic pigment dispersion
Reduce viscosity of grinding system, improve color development of millbase
APEO free
Chemical Components
Mixture of Amine alkyl hydroxy affixture of HMW styrene acrylic copolymers and surfactant
Recommended Applications
Phthalocyanine organic pigment(blue/green)
Azo organic pigment(red/yellow)
Physical propertiesTypical Properties |
Item | DS-197 |
Appearance | Yellow liquid |
Content(%) | 60% |
Solvent | water |
Grinding operation
Dispersing sand mill, Glass bead(0.8-1.2mm), Filling rate 70%
3000rmp/min 60min
Performance evaluation- Centrifugal stability: take 20ml millbase into centrifuge tube, centrifuge 10 min under condition of 3000r/min, then take out to observe the layering of millbase. Pour out liquid and calculate amount and percentage of precipitate.
- Viscosity evaluation:Use Brookfield rotational viscometer.
- Fineness measure:Scraper fineness meter
- iscosity stability:Store millbase in 100ml wild-mouth bottle at 40ºC for 24 hours, measure viscosity change, ±50% change is regarded qualified.
Example1(★:Excellent ☆:Good )
Experimental pigment: phthalocyanine green G, powder content 30%
Pigment content: 30
Dispersant dosage(as supplied): 20
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100%Item | Toynol® DS-197 | Imported dispersant |
Dispersant dosage(SOP) | 40% | 40% |
Wetting of original powder | Quick | Quick |
Stock solution stability (centrifugation) | ★ | ★ |
Dilution stability(centrifugation) | ★ | ★ |
Millbase viscosity | ★ | ☆ |
Dispersion fineness(μm) | ≤2.5 | ≤2.5 |
Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy |
Example2(★:Excellent ☆:Good )
Experimental pigment: permanent yellow P.Y.12, powder content 35%
Organic pigment content: 35
Dispersant dosage(as supplied): 20.4
Defoamer(Toynol®): 0.1-0.3
Wetting agent(Toynol®): 0-0.3(as appropriate)
Water: add to 100% Item | Toynol® DS-197 | Imported dispersant |
Dispersant dosage(SOP) | 35% | 35% |
Wetting of original powder | Quick | Quick |
Stock solution stability (centrifugation) | ★ | ☆ |
Dilution stability(centrifugation) | ★ | ☆ |
Millbase viscosity | ★ | ☆ |
Dispersion fineness(μm) | ≤2.5 | ≤2.5 |
Change of storage viscosity | Without thickening and thixotropy | Without thickening and thixotropy |
(When actual operation:First add dispersant into water, then add powder, 4000rmp/min 10min. After powder completely wetting, put into grinding glass beads to start timing grind.)
Recommended Applications- Water-based inks
- Architectural coating
- Wood and furniture coatings
- Automotive coatings
- Can coatings
- Anticorrosive paint
- Leather coatings
Operation proposal - Suggested dosage of organic pigment(Based on pigment, Toynol® dispersants calculate solid content SOP):10-50%;
- Do not add wetting agents separately;
- Toynol® wetting agents can accelerate original powder wetting;
- Adding Toynol® defoamers can quickly eliminate grinding foam;
- To obtain optimal performance, Toynol® additives must be added in water before resin and pigment;
- Advise gradient test;
Packaging/storage
25L/plastic drum;220L/iron drum
As liquid material, this product should be sealed and placed in a dry, cool, well-ventilated place at room temperature
Contact us