Products

Shark Emulsifier and Wetting Agent Hyper Mul

China Shark Emulsifier and Wetting Agent Hyper Mul, Find details about China One Drum Emulsifier, Oil Based Mud from Shark Emulsifier and Wetting Agent Hyper Mul

Model NO.
DFS06-005
Model NO.
DFS06-005

Shark Emulsifier and Wetting Agent Hyper MulShark Emulsifier and Wetting Agent Hyper MulShark Emulsifier and Wetting Agent Hyper MulShark Emulsifier and Wetting Agent Hyper MulProduct Description

HYPERMUL® one drum emulsifier is the only emulsifier in the fluids formulation designed in the HYPERDRIL™ extreme temperature non-aqueous drilling fluid system. It is used alone to provide excellent emulsion stability, preferential wetting of solids by the continuous phase, filtration control and overall system stability. It requires the addition of lime to produce a calcium soap in-situ.

Applications/Functions

  • Prepares HYPERDRIL™ extreme temperature NAF system
  • Impact oil-wetting characteristics and helps maintain HPHT filtrate in a water-free state

Advantages

  • Temperatures stable to >450°F(232°C)
  • One-drum emulsifier, eliminating the need for separate primary and secondary emulsifiers
  • Formulated to produce flatter gel strengths when compared against conventional emulsification packages
  • Effective and thermally stable across a broad temperature range

Typical Properties

  • Appearance: Transparent Amber Viscous Liquid
  • Flash point: 97°C (207°F);  Pour Point: -16°C (3°F); Specific gravity: 0.94

Recommended Treatment

  • A typical range is 8-12 ppb (22.8-34.2kg/m3). For every pound of HYPERMUL® that is added to the system, add 0.5 ppb of lime
  • For HPHT applications above 450°F (232°C) and 16ppg (1.9SG), HYPERMUL® concentrations of up to 25 ppb (71.3kg/m3) maybe required, and 1-3ppb (2.8-8.5 kg/m3) of HYPERWET® may be required as supplementary wetting agent

Package

  • 55GAL (208L)/DRUM or 181KG/DRUM
Shark Emulsifier and Wetting Agent Hyper Mul
SHARKProduct DescriptionApplications/Functions
SHALEMUL®  PPrimary Emulsifier designed for shale gas drilling up to 350°FConventional organically clay OBM
SHALEMUL® SSecondary Emulsifier designed for shale gas drilling up to 350°F Conventional organically clay OBM
NEOMUL® PHP Primary Emulsifier designed for long horizontal drilling up to 400°FClay-free high performance OBM 
NEOMUL® SHP Secondary Emulsifier designed for long horizontal drilling up to 400°FClay-free high performance OBM 
HYPERMUL®One drum Emulsifier designed for extreme HT up to 450 °F High performance OBM for application in extreme HPHT wells 
SHALEWET®Wetting agent designed for shale gas drilling up to 350°F Economical Wetting agent for OBM
NEOWET®High Performance Wetting Agent up to 400°F All-purpose wetting agent for OBM
HYPERWET®HT Wetting Agents up to 450°F Wetting agents with application for HT wells 
 

You Might Also Like