Products

PTFE Bellows to Compensate for Mechanical and Thermal Changes

China PTFE Bellows to Compensate for Mechanical and Thermal Changes, Find details about China Ptfe Lined Expansion Joint, Teflon Lined Expansion Joint from PTFE Bellows to Compensate for Mechanical and Thermal Changes

Movement Restricted
by Three Steel Tie Rods at 120 Degree.
Trademark
Fuyuan
Specification
Dn15-Dn1600
Origin
China
HS Code
7307990000
Movement Restricted
by Three Steel Tie Rods at 120 Degree.
Trademark
Fuyuan
Specification
Dn15-Dn1600
Origin
China
HS Code
7307990000
PTFE Bellows to Compensate for Mechanical and Thermal Changes
Use occasion: It can be used to eliminate the extension of pipeline, container or equipment caused by climate change or swell or displacement caused by other reasons; And used as the vibration-relief device in the access of pump or the two ends of other high frequency machine to reduce or eliminate the vibration; Also used to absorb the deviation between design and actual installation.

Excellent performance: It solves the problem that the metal compensator has bad compensation ability and corrosion resistance to reduce the enterprise cost and promote the production benefits; Besides, it is reliable and has compact structure and high compensation ability, which can extend the using life of pipeline.

Special pieces of specific or non standard size can be manufactured on request.
Nominal Diameter (mm/in. ): DN15-DN1600 (NPS1/2-NPS64)
Fatigue frequency: Above 5000 times
Operating temperature: Below 200degree
PTFE bellows with steel shield        
Nominal diameter Convolution Length (mm) Axial (mm) Lateral (mm) Angular (degree) Negative pressure Pressure (Mpa)
DN(mm) NPS(inch)
DN15   1/2 3 70 8 6 20 -0.1 0.4
DN20   3/4 3 70 10 6 20 -0.1 0.4
DN25 1      3 80 12 8 20 -0.1 0.3
DN32 1 1/4 3 80 14 12 20 -0.1 0.3
DN40 1 1/2 3 85 17 15 25 -0.1 0.3
DN50 2      3 95 20 20 25 -0.1 0.2
DN65 2 1/2 3 110 22 23 30 -0.1 0.2
DN80 3      3 115 24 24 30 -0.1 0.2
DN100 4      3 120 26 25 30 -0.1 0.1
DN125 5      3 130 29 25 30 -0.1 0.1
DN150 6      3 140 32 20 25 -0.1 0.1
DN200 8      3 150 40 20 25 -0.1 0.06
DN250 10      3 160 40 12 15 -0.1 0.06
DN300 12      3 180 40 12 10 -0.1 0.06

You Might Also Like