Products

G25/G18/ G30 /G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting

China G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting, Find details about China Bearing Steel Grit, Steel Grit from G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting

Model NO.
Bearing Steel Grit
Density (g/cm3)
7.4
C Level
<2
Durability
2000-2800 Times
Metallographic Structure
Fine and Homogeneous Tempered Troosite
Trademark
Yalong
Transport Package
Big Bags or Pallets
Specification
0.7mm
Origin
China
HS Code
72051000
Model NO.
Bearing Steel Grit
Density (g/cm3)
7.4
C Level
<2
Durability
2000-2800 Times
Metallographic Structure
Fine and Homogeneous Tempered Troosite
Trademark
Yalong
Transport Package
Big Bags or Pallets
Specification
0.7mm
Origin
China
HS Code
72051000
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
Product parameters
Bearing Steel Grit, it's much different with cast steel grit, it's cracked from Ball Bearing scraps with heat treatments. This kind of steel grit has no cambered surface, efficiency higher than common cast steel grit for stone cutting. And also this bearing steel grit contain Chrome 0.6-1.6%, much more wear resisting during stone cutting!
Specification:
ProductSTEEL GRIT GH/GL/GP10-120
Chemical Composition 
%		C0.80-1.20
 Mn0.20-1.20
 Si0.15-1.20
 S≤0.05
 Cr0.60-1.60
 P≤0.05
Hardness ( HRC )60-66(GH)   50-60(GL)   40-50(GP)
Density (g/cm3)7.4
Durability2000-2800 times
Metallographic StructureFine and Homogeneous Tempered Troosite
C Level<2
Steel Grit Application
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
Company information
Zibo Yalong Abrasive Co., Ltd, established in 2007, based in Zibo City, Shandong Province, is a leading manufacturer of metallic abrasives. We produce high quality Steel Shot, Steel Grit, Steel Cut Wire Shot, Stainless Steel Cut Wire Shot etc.
Our main products as following:
A) High Carbon Steel Shot: S70, S110, S170, S230, S280, S330, S390, S460, S550, S660, S780, S930;
B) High Carbon Steel Grit: G10, G12, G14, G16, G18, G25, G40, G50, G80, G120; GL, GP, GH three grades available;
C) Bearing Steel Grit: Mainly G18, G25, G40 for stone cutting;
D) Steel Cut Wire Shot: CW0.6, CW0.8, CW1.0, CW1.2, CW1.5, CW1.8, CW2.0, CW2.2, CW2.5;
E) Stainless Steel Cut Wire Shot: 0.3mm - 2.5mm; Materials: 304/430/410; As cut or conditioned both available.
Besides these metallic abrasives, Cast Stainless Steel Shot, Cast Zinc Shot, Zinc Cut Wire Shot, Copper Cut Wire Shot, Aluminum Cut Wire Shot etc. Also available.
Welcome your inquiry and visit to our factory! We'll be your reliable partner and good friends!
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
Research and quality control
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
Certifications
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
Packing & Delivery
G25/G18/G30/G40 High Alloy Angular/Bearing Steel Grit for Gang Saw Cutting
FAQ:

Q:  Are you a factory?
A:  Yes, we are a factory/manufacturer. We established the steel abrasives factory since 2007.
Q:  What is your products range?
A:  Our main products are High Carbon Steel Shot, High Carbon Steel Grit, Carbon Steel Cut Wire Shot, Stainless Steel Cut Wire Shot. After years of development, we expanded our products range, Bearing Steel Grit for marble & Granite cutting, Cast Stainless Steel Shot, Zinc Cut Wire Shot, Aluminium Cut Wire Shot, Copper Cut Wire Shot, Garnet Sand, Fused Alumina, Sandblasting Gloves etc. also available!
Q:  What's the production capacity of your steel abrasives?
A:  The annul output of steel abrasives is more than 30,000 MT.
Q:  What's the MOQ for the steel abrasives?
A:  Usually 2 MT is the MOQ for steel abrasives.
Q:  What's the payment terms?
A:  T/T (Bank Transfer) or LC at sight both ok!
Q:  What's the package method?
A:  a) 25 kgs/bag, 40 bags/big bags; 
b) 1000kgs/big bag; 
c) 25kgs/bag, 40 bags/pallet; 
d) 25kgs/bag, 40 bags/carton box with pallets,
any other requirements pls feel free to contact us.
Q:  Can we get your free samples?
A:  Yes, usually we offer free samples within 500 grams. If you have any other requirements, pls feel free to let us know.
Q:  Can we visit your factory?
A:  Yes, we welcome our friends and partners from all over the world! Our factory locate in Zibo City, Shandong Province, China. You can come to Jinan Yaoqiang airport or Zibo railway station. We will arrange car to pick you up to our factory.

You Might Also Like