Products

ARG Fiberglass for Pre-Mixing GRC ZrO2 16.7%

China ARG Fiberglass for Pre-Mixing GRC ZrO2 16.7%, Find details about China Fiberglass Chopped Strand, Fiberglass from ARG Fiberglass for Pre-Mixing GRC ZrO2 16.7%

Model NO.
ARC13-76-12MMH ZrO2 16.7%
Trademark
HUIERJIE
Specification
ARC13-76-12MMH ZRO2 16.7%
Origin
Hubei, China
HS Code
70191100
Model NO.
ARC13-76-12MMH ZrO2 16.7%
Trademark
HUIERJIE
Specification
ARC13-76-12MMH ZRO2 16.7%
Origin
Hubei, China
HS Code
70191100

ARG Fiber Advantages

With the original E-glass fibers, durability was a big issue since the fiber broke down and lost strength in concrete, then the alkali-resistant Glassfibre is developed and made resistant to the high alkali corrosion through the use of zirconium-dioxide.

Huierjie ARG Fiber properties including excellent alkali -resistance with high ZrO2 content of over 16.7% , good tensile & flexural properties, high elastic modulus, freeze thaw resistance and crack fatigue with excellent impermeability properties.

Huierjie ARG Fiber used in the manufacturing of GRC cladding provides enough opportunities for architects to design ornate and complex exterior high performance & environmentally friendly building cladding solutions.

AR/ARG GLASS FIBRE CHOPPED STRAND HEJ 16.7%

 

Premix GRC

HEJ 16.7% Premix is a high integrity chopped fibre, designed for using in dry mix systems or other premixing processes for subsequent molding into a GRC intricate component.hopped fibre, designed for using in dry mix systems or other premixing processes for subsequent molding into a GRC intricate component.

High Intergrity

HEJ 16.7% High integrity has a low-tex strand which permits efficient reinforcement at low dosages. The coating size systems give easy incorporation whilst retaining best strand integrity, especially used in the electric closet panels.

Water dispersed

HEJ 16.7% water dispersed can be simply added to the mix at the workshop without the need of a special equipment and disperse into filaments in a matrix of calcium silicate slurry, cement slurry etc.

Application:

The 'Premix' production technique involves pouring or pumping a cement/fibre mix into a mould, similar to other precast production processes. The mix is compacted using vibration or by adding other components. The unit is left in mould to set and demoulded the following day.Pre-mix has the advantages that moulds can be simper to produce and strip.

 

Benefits:

  • Excellent alkali resistant and durability
  • Highest integrity during mix
  • Good stiffness
  • Good fluidity
  • Be compatible with concrete slurry
  • Been Tested in Sheffied University,UK

Packaging & Storage:

20kgs /kraft bag, 40bags/800Kg/pallet/109*109*105cm; 50bags /1000kg/109*109*125cm, 20palltes/ 1*20' FCL, N.W.18ton.

Huierjie AR Glassfibre roving pallet shall be stored dry in original packaging and advisable to stack in one layer, at a temperature between 15ºC- 35ºC & relative humidity between 35%- 65%.If stored below 15ºC, it is advisable to hold in workshop for 24 hours to prevent condensation before use.

 

Note: 
Huierjie ARG Fiber are manufactured with high Zirconia rate in compliance with the BSEN 15422:2008 and ASTM C1666/C 1666/M-07 and under the recommendations of GRCA.

You Might Also Like