With an integrated speed sensor, this mid-drive motor, which is compatible with standard bikes, has a rated power of 250W, a reduction ratio of 1: 21.9 and a maximum torque of 80 N.m, providing ideal power for vehicles. Light but strong and efficient, this motor greatly enhances riding comfort and is suitable for touring bikes and commuter bikes. Feature:
Upgrade:Upgraded IRFB3077 mosfets controller.
Four riding modes:Pure electric mode & human riding model & power assistance & push model. 4 working modes can be switched at will.
Easy Installation:Can be successfully installed into an electric bicycle in just a few time by only a few tools which can remove the crankset and the center shaft, as well as tools for installing this mid-drive motor.
Universal Compatible:It's compatiable with mountain bike,road bike, racing bike ect bikes with 68-73mm bottom bracket
Motor Specification:
Motor Model: BBS01B
Bafang Model: MM G340.250
Power:250W
Voltage:36V
Controller Current: 15A
No Load Speed(RPM) :83-87
Load Speed(RPM):78-83
MAX Torque:80 N.m
Efficiency: > 80%
PAS SENSOR : Speed Sensor
Reduction Ratio: 1 : 21.9
Centification:CE/EN 14764/ROHS
Waterproof Grade:IP65
Motor Weight: 3.98kg
Bracket bottom length:68mm
Operation Temperature:-20-45ºC
Waterproof Grade: IP65
Display Working Temperature: -20-80C 36V 22.5Ah Specification:
Normal Voltage: 36V
Rated Capacity:22.5AH
Battery Cell:Built in 2500mah
Array mode:10s9p
Battery size: 475.9*162*88.9mm
Battery Weight:7KG
Max Constant Discharge Current:30A
Peak current:60A
Charge voltage:42V
Discharge cut off voltage:28V
Way of Charge:CC/CV
Cycle Life:1000 times
Charge Temperature:-15-65ºC
Discharge Temperature:-15-65ºC
Protection Function:Over charge, Over discharge,Over current, Short circuit, Balance
FAQ:
Q: How do I know if this mid drive motor fits for my bike?
A: This mid drive motor fits for the bike with 68mm (2.68inch) - 73mm (2.87inch) wide bottom bracket. The inner diamater of the bracket should be not less than 33.5mm. We'll send extra install accessoreis for 73mm bottom bracket.
Q: How do I confirm whether I need the brake levers or the brake sensors?
A: If your brakes are hydraulic or you want to use your own brake sensors, you can choose brake sensors. They can connect with your brakes to work directly.
Q: Can I install the motor as soon as I receive it?
A: Before installing the motor, please follow the steps in the manual to connect the motor to see if the motor can work normally. If there is a problem, please contact us first, we will provide technical support, don't worry.
Packaging included:
1 * 36V 250W Mid Drive Motor
1 Pair * Brake Lever or Brake Sensor
1 Pair * Crank
1 Pair * Chainwheel(44T/46T/48T/52T option, please kindly leave us message if you want to change chainwheel)
1 Set * Thumb Throttle
1 Set * Speed Sensor
1 * Display ( 750C bluetooth, DPC18, KD986, 860C, P850C, 850C, 750C, SW102, 500C, C965, C961 option)
1 * 4 in 1 Cable
1 * Accessories1 * 36V 22.5Ah battery with trunk
1 * Battery charger (US/EU/AU/UK Option)
Warm Tips:
1, Due to the particularity of the battery, some motors and batteries are not in the same warehouse, so you may receive more than one package. If there are not all products in the package you received, please do not open dispute or bad reviews first, please contact us for confirmation.
2. When using the motor kit, please make sure that the battery key is locked, otherwise the discharge port is easily burned out.