Products

4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System

China 4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System, Find details about China Vertical Machining Center, Machining Center from 4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System

Model NO.
Vmc1370
Performance Classification
Economical CNC Machine Tools
Condition
New
Transport Package
Wooden
Specification
3650*2750*2850
Origin
China
HS Code
8501109190
Model NO.
Vmc1370
Performance Classification
Economical CNC Machine Tools
Condition
New
Transport Package
Wooden
Specification
3650*2750*2850
Origin
China
HS Code
8501109190

4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System

4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System Structural performance of machine tool
1. Fuselage design
The fuselage and saddle are reinforced by mountain shaped ribs, with the shortest force streamline, ensuring the best rigidity of the fuselage.
Based on the excellent engineering design, the stiffeners of the base and column of the machining center can resist the torsion and damping, and transfer the cutting vibration to non
Cutting area. The column is designed with torque tube, which can provide excellent rigidity, bending and torsion resistance Ultra wide base design,
At the same time, lower the center of gravity of the base and adjust the center of gravity of the machine tool to the best stable height. The span at the bottom of the column is widened to improve the stability of the machine tool.
2. spindle head
The contact length ratio between the main shaft and the column is appropriate to provide stable support for the main shaft. Independent cooling system is built in the spindle head to stabilize the spindle continuously
The head heat is in a reasonable range, which reduces the thermal extension of the spindle and ensures the machining accuracy.

3. counterweight
In response to the processing requirements of different models, the following counterweight methods are adopted:
Counterweight: low failure rate and long service life;
Nitrogen counterweight: rapid action, no noise, greatly improved processing accuracy, increased machine life;
No counterweight: in order to meet the requirements of high speed and high sensitivity processing, the machine tool adopts the method of no counterweight, and enhances the requirements of servo motor and screw,
Z-axis with brake, to ensure the accuracy of the machine tool is stable and lasting, and increase the service life.
4. screw rod
It adopts imported grinding level pre drawn double nut screw rod to eliminate reverse clearance. After heat treatment, it has high rigidity, wear resistance, torsion resistance and long service life, which guarantees high machining accuracy of the machine.
5. AC servo motor
Adopt original imported from Japan, super high performance servo motor, provide stronger power when heavy cutting.
In the case of low feed, high torque can still be maintained.
Higher than 10000 (pixel) resolution and closed-loop position feedback ensure high accuracy.
High quality coupling ensures that the screw rod moves with the axis of the motor.
6. Lubrication system
The whole machine adopts a positive displacement lubrication system and a de pressurized oil pump, with stable pressure and flow, which effectively transports the oil to each lubrication point and provides uniform forced lubrication for each slide surface, so as to ensure the accuracy and service life of the machine tool.
7.Chip remover system
4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System
Project unit LK-1370V 
 Processing range
X-axis travel (left and right)mm 1300 
 Y-axis travel (front and back)mm 700 
 Z-axis travel (up and down)mm 650 
Spindle nose to the tablemm 120-770
  Column to the spindlemm 770
Table
  (L*W) Table sizemm 1400*700
   Max.load capabilitykg 800
  T-slot (width* spacing* quantity) mm 18T*110*5
 Table heightmm 920 
Three axes
    X-axis roller guide screw mm Φ40*P10 
    Y-axis roller guide screwmm Φ40*P10 
Z-axis roller guide screwmm Φ50*P10 
  X-axis Guideways Typemm 45(6 Slide roller)
  Y-axis Guideways Typemm 45(8 Slide roller)
    Z-axis Guideways Typemm 55(6 Slide roller)
    Rapid traverse (X/Y/Z)M/min 30/30/30
    Recommended X/Y/Z axis motor parametersNM(kw) 3.0/3.0/3.0
Spindle
   Spindle speedrpm 8000
  Taper hole and installation sizekg BT40∮150
Transmission way mm Belt type
Recommended spindle motor parameterskW 11-15 
Precision (X/Y/Z)
  Positioning accuracy mm ±0.003/300
  Repeat positioning accuracy mm ±0.003/300
Others
  System FANUC OI-MF
  Tool pockets BT40-24T
  Floor space (length* width* height) mm 3650*2750*2850
  Basic machine weightKg9000

4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System4 Axis Vertical Machining Center Vmc1370 with Fanuc Control System

You Might Also Like