China Output 40V 60V 2500mA 150W IP66 Constant Current LED Power Supply, Find details about China Constant Current LED Power Supply, 150W LED Power Supply Constant Current from Output 40V 60V 2500mA 150W IP66 Constant Current LED Power Supply
Feature
· Output constant current
· Universal AC input:100-265VAC
· Built-in active PFC function
· High efficiency up to 88%
· Protections:Short circuit/Over current/Over loading
· Cooling by free air convection
· IP66 design for indoor or outdoor installation
· Class 1 power unit
· Three in one dimming function(0/1-10Vdc or PWM signal or resistance)
· Dimming range: 0-100%
· Suitable for LED lighting and moving sign applications
· Compliance to worldwide safety regulations for lighting
· Three years warranty
Specification
Model | KI-503100-A-DIM | KI-423500-A-DIM | KI-364200-A-DIM | |
Output | DC Current | 3100mA | 3500mA | 4200mA |
Current Tolerance | ±5% | |||
Output voltage range | 30-50V | 25-42V | 22-36V | |
Rated power | 155W | 147W | 151W | |
Open circuit voltage(Max) | 55V | 46V | 40V | |
Input | Voltage Range | 100~265VAC | ||
Frequency Range | 47~63HZ | |||
Power Factor | PF≥0.98/120VAC PF≥0.98/230VAC PF≥0.95/265VAC(Full loading) | |||
Efficiency(Typ.) | 88% | 88% | 88% | |
AC Current(Max.) | 1.54A | 1.46A | 1.50A | |
Leakage current | <0.5mA
| |||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | ||
Over Loading | ≤120% | |||
Over temperature | 100ºC±10ºC, Shut down o/p voltage, recovers automatically after temp. goes down.
| |||
Others | Net.Weight | 1.6Kg | ||
Size | 256/78*47mm(L*W*H) | |||
Packing | 305*295*210mm 10PCS /CTN | |||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25ºC of ambient temperature. 2. Tolerance:includes set up tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |