China NEMA23/57mm Stepper Motor with Encoder and Driver Controller, Find details about China Servo Motor, Servo System from NEMA23/57mm Stepper Motor with Encoder and Driver Controller
Motor Type | 57IC09 | 57IC22 | 57IC30 | 5731C10 | 5731C15 | |
Holding Torque | 1.0N•M | 2.2N•M | 3.0N•M | 1.0N•M | 1.5N•M | |
Vector Maximum Current | 6A | 6A | 8.0A | 5.6A | 5.6A | |
Drive Control Scheme | Pure vector FOC control scheme, quick start and stop point(PM) control scheme, power angle control scheme | |||||
Step Angle / Motor Pole Pairs | 1.8°/50 pairs pole | 1.2°/50 pairs pole | ||||
Recommended application | Operation smooth in low-speed, and output strength is good in high-speed, low temperature rise, small vibration, excellent anti-interference ability and EMC effect | |||||
Operation voltage | 15-50Vdc,36Vdc recommend | |||||
Overvoltage Protection Voltage | 68Vdc±2 | |||||
Voltage control method | 32 bits DSP Vector closed - loop control technology | |||||
Pulse Limit Frequency | 200KHz | |||||
Protection | Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm | |||||
Input Signal | Pulse, direction and enable differential / single-ended interface signal, interface level 4.5-28Vdc compatible, no need external current limiting resistor | |||||
Output Signal | Alarm / in-position signal OC output, the output capacity is100mA, need external pull-up resistor, the maximum pull up voltage is 24Vdc | |||||
Position Error Control Accuracy | ±1 Pulse | |||||
Subdivision No. | Default 1600 / rev, through the DIP switch or debug software setting subdivision (200-51200) |
Pulse/Rev. | SW1 | SW2 | SW3 | SW4 |
Default | ON | ON | ON | ON |
800 | OFF | ON | ON | ON |
1600 | ON | OFF | ON | ON |
3200 | OFF | OFF | ON | ON |
6400 | ON | ON | OFF | ON |
12800 | OFF | ON | OFF | ON |
25600 | ON | OFF | OFF | ON |
51200 | OFF | OFF | OFF | ON |
1000 | ON | ON | ON | OFF |
2000 | OFF | ON | ON | OFF |
4000 | ON | OFF | ON | OFF |
5000 | OFF | OFF | ON | OFF |
8000 | ON | ON | OFF | OFF |
10000 | OFF | ON | OFF | OFF |
20000 | ON | OFF | OFF | OFF |
40000 | OFF | OFF | OFF | OFF |