Products

Heat Exchanger Plate and Gasket with Good Quality

China Heat Exchanger Plate and Gasket with Good Quality, Find details about China Heat Exchanger Plate, Heat Exchanger Gasket from Heat Exchanger Plate and Gasket with Good Quality

Plate Hole
0 Hole, 1 Hole, 2 Holes, 3 Holes, 4 Holes
Gasket Type
Clip on, Lock in, Glued
Gasket Material
NBR, HNBR, EPDM, Fluorine Rubber
Plates and Gaskets
Heat Exchanger M6, M10, M15,T5m, M20 , Mx25
Trademark
Jiema
Transport Package
Polywood Box
Specification
ISO9001: 2008, SGS
Origin
Guangzhou, China
HS Code
8419909000
Plate Hole
0 Hole, 1 Hole, 2 Holes, 3 Holes, 4 Holes
Gasket Type
Clip on, Lock in, Glued
Gasket Material
NBR, HNBR, EPDM, Fluorine Rubber
Plates and Gaskets
Heat Exchanger M6, M10, M15,T5m, M20 , Mx25
Trademark
Jiema
Transport Package
Polywood Box
Specification
ISO9001: 2008, SGS
Origin
Guangzhou, China
HS Code
8419909000
M6, M10, M15,T5M, M20 , MX25 Heat Exchanger Plates and Gaskets

Description
Introduction to Plate Sheet
             The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition;
Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets.
The herringbone corrugated sheet is featured by high heat transfer efficiency; in addition, net-shaped contacts are formed in mutually reverse directions after the entire machine is assembled, featuring good pressure resistance.




Features :

  1,  high heat transfer efficiency
  2 ,  net-shaped contacts
  3, good pressure resistance

  
 Material Description Code Applicable Temperature (degree centigrade  ) Anti-corrosive Performance and Applicable Occasions
 NBR N -20~110 Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc.
 EPDM E -50~150 Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.
CR C -40~100 Ammonia, mineral oil and lubricant, etc.
 Fluorine Rubber F 0~180 Inorganic acid, alkali, mineral oil and Haloalkane, etc.
 Silicon Rubber Q -65~230 Resistant to cold current and dry hot

Factory Corners :



Certificates:
 CE , SGS , TUV , ISO9001:2008

You Might Also Like