China Made Drillmec 7ts600 Mud Pump Liners

China Made Drillmec 7ts600 Mud Pump Liners, Find details about China Ceramic Liner, Bimetallic Liner from China Made Drillmec 7ts600 Mud Pump Liners

Basic Info.

Model NO.

Drillmec 7TS600

Feature

Interchangeable with Popular Brand

Trademark

BETTER

Transport Package

Plywood Case

Specification

EMSCO D700

Origin

China

HS Code

8431431000

Model NO.

Drillmec 7TS600

Feature

Interchangeable with Popular Brand

Trademark

BETTER

Transport Package

Plywood Case

Specification

EMSCO D700

Origin

China

HS Code

8431431000

Product Desciption

BETTER Drilling Fluid Equipment Industrial Limited offers a full line of premium expendables and service parts for most popular models of mud pumps that are currently in operation worldwide. These items include various styles of valves,seats, pistons, liners, piston rods, and extension rods, as well as all fluid end spares. We also offer a complete selection of fluid cylinder modules and power end components, such as crankshaft assemblies, pinion shafts, gear sets, bearings, connecting rods and crossheads.

These parts combine the finest materials and manufacturing expertise, including the premium service and support. The result is the best performing products available from any manufacturer. Whether you are running Brewster, Emsco/Bomco, Drillmec, Gardner-Denver, Gaso, HongHua, Ideco, Lewco, Massarenti, National, Oilwell, OPI or Wirth, Wheatley, Wilson pumps in your rig fleet.

BETTER is committed to meeting and exceeding our customer's expectations. To achieve this objective, we conform with ISO 9001 for operational procedures and all the parts are made strictly according to API Spec 7K standard.

When you have questions pertaining to the parts and service offered in this field, we are ready to address
your needs and welcome your call.

BETTER supplies a wide range of liners to fit most popular mud pump types. Triplex and duplex are both available for high chrome liners, chrome plated liners, hardened single steel liners, and Zirconia ceramic liners. All these liners are manufactured by advanced technology, with metallurgical control and rigid inspection to ensure its high quality.
All our liners are made of high strength forged steel hulls, the inner sleeves are mounted in the hull to a tightness averaging 18 thousands tight. After the hull and sleeve are assembled, the I.D. of the liner is honed to a perfect circle like a mirror. And HP design with shoulder-on-hull design is machined to prevent sleeve slippage and overcome the high pressure drilling conditions.

CHROME-IRON LINERS(BIMETAL LINERS)
The outer hull of this liner is a high strength forging 45# steel, and the inner sleeve is high chrome iron by centrifugally cast for a deeper hardness. Bore hardness is 59-65 Rockwell. The sleeve is then inserted into the hull at a tightness that exceeds its counterparts. The liner is rated to match the pressure up to 5,000 PSI and above and the extreme long service life to be around 1000h.

ZIRCONIA-CERAMIC LINERS
BETTER's Zirconia-ceramic liner is produced from a unique Zirconium-based ceramic compound that is extremely pure and stabilized, so that it avoids Alumina-ceramic liners's brittle, and exhibits better polished, impact strenght, long lasting, tough, crack resistant than Alumina-ceramic liner.
With these property advantages, the liners' sevice life will be greatly extended,and an indirect effect will reduce the friction between the liner and pistons, which in trun extends piston life and reduces pump-cooling requirements, and good performance on the high temperature application. Finally, it will save a huge cost for the drilling work.

CHROMIUM-PLATED LINERS
Chrome plates the same outer hull's inwall instead of chrome iron sleeve inserted to a maximum thickness to reach the hardness of 59-62HRC when the outer hull's is too thin. It is then machined and polished to a mirror finish.
Hardened liners is made by carburizing layer, instead of high chrome iron sleeve or the plated chrome, to realize its hardness, then to be honed to a mirror-like finish for smooth and even wear to assure easy installation and long life.

HARDENED LINERS
Hardened liner usually is made for normal to mildly corrosive mud conditions.
Carburized layer guarantees the liners' hardness. These liners are hardened
and heat treated under strict quality control, and are honed to a mirror-like finish
for smooth and even wear to assure easy installation and long life.

GASKETS&PACKINGS
BETTER's gaskets and packings are two kinds of being made of high-quality synthetic rubber and polyurethane, both offers excellence performance in required application.
China Made Drillmec 7ts600 Mud Pump Liners