China PVD Resistance Evaporation Vacuum Glass Coating Machine From Daisy, Find details about China PVD Glass Coating Machine, Vacuum Glass Coating Machine from PVD Resistance Evaporation Vacuum Glass Coating Machine From Daisy
Equipment specification | PVD/ZF-2500 type resistance evaporation vacuum coating machine | |
Item | Configuration and requirements | |
Vacuum chamber
| Dimension of internal | Length 2500*width 600*height 1600mm (According to the final design size) |
Material | Vacuum chamber use 304 stainless steel; Internal wall mechanical polishing, external surface spray paint treatment; | |
Structural type | Vertical, box structural The external strength of the cavity is strengthened by strengthening the cavity. One end of the chamber opens the door and the suction port is on the side of the chamber. The bottom of the cavity has a work-piece frame walking track. | |
Observation window | There is one observation windows on the chamber door, which can observe the indoor work. | |
Interior lining panel | The interior chamber equipped with stainless inner lining, easy to unload; Equipped with two interior lining panel; | |
Cavity base | Use Q235 material manufacture,surface painting; | |
Ion source | In the cavity to install a set of ion source, before the use of high-energy ion plating on the work-piece surface bombardment cleaning, improve the film adhesion; Equipped with one set high voltage DC supply (5000V/20KVA) | |
Air exhaust | Pure pumping | Use 2 stands KT-630 type diffusion pump Pumping speed:18000L/S Power:11KW/stand Equipped with two sets water cooling system |
Booster pump | Use 1 stand ZJP-1200 type Roots pump Pumping speed:1200L/S Power:11KW | |
Mechanical pump | Use 1 stand HL-150 type slide valve pump Pumping speed:150m3/h Power:11KW | |
Holding pump | Use 1 stand 2X-30 type rotary vane pump Pumping speed:30m3/h Power:3KW | |
Vacuum network | Equipped with one KT-630 type pure pumping valve Equipped with one DF-200 type beginning pump valve,one DF-200 type front valve. With a pump to maintain a solenoid valve, cavity inflatable valve 2, 1 set of pipeline inflatable valve Vacuum valve all use pneumatic baffle valves, aluminum alloy cylinder; Vacuum pipe 1 set, stainless steel production and processing, surface painting; | |
Work-piece car | Work-piece frame with 2 sets, the use of stainless steel production; Work-piece frame loading size: length 1900mm high 1300mm | |
Evaporation system | Each work-piece rack to install multiple sets of evaporation tungsten wire, the staff in the cavity outside the addition of aluminum wire; Evaporation electrode using copper material production; The vacuum chamber is fitted with a set of collision electrodes connected with the evaporation electrodes on the workpiece frame; With evaporation transformer 1 (14V / 40KVA) The use of power control mode, can be set to set the evaporation power and time; | |
Vacuum measuring system | Digital composite vacuum gauge one set High vacuum measurement 1 way, low vacuum measurement 2 way | |
Cooling system | Equipped with one set water separator. Inlet and outlet the water pipe divided into two kinds of color distinction, alignment specification, neat, beautiful | |
Vacuum seal | Equipped with special vacuum temperature resistance, pressure seals. | |
Electric control | Mitsubishi PLC control, 12-inch color touch screen, can also be fully automatic control equipment; The main components of the brand products; Use over-current, overload, overheating protection, while equipment with water, gas alarm and other protection Valve self-locking, interlock Using a standard electronic control cabinet 1 | |
Vacuum parameter | Pumping speed | New machine,no-load,clean,cold state from atmosphere to 3×10-2Pa 10 min. |
Ultimate vacuum | New machine,no-load,clean,cold state 8×10-4 Pa | |
Pressure rising rate | New machine, no load, clean, cold state pumping more than 5 hours off the valve 0.8Pa / 20min | |
Production takt | About 15min/furnace (not include loading time) | |
Total power | Installed power:107KW Actual power consumption:about 40KW/h | |
Total water consumption | Recirculating water,flow about:6m3/h | |
Dimension | L5000*W4500*H3000 mm | |
Total weight | About 6000 kg |
Product picture