Italy Biomass Corn Stalk Straw Wood Sawdust Briquette Press Machine

Introduction:
1. The transmission of the whole machine adopts four-stage parallel hard tooth surface helical gear reduction,   
    large gear modulus, wide working surface and large carrying capacity, and the transmission strength is 3-5
     times that of the conventionalreducer.

2. There are a wide range of finished products, which can produceφ8-φ26mm pellets and square 32mm   
    briquette products.

3. It can realize the multi-use of briquetting and granulation, and the mold of the whole machine is highly
    interchangeable.

4.The whole machine adopts modular design completely, and the assembly and disassembly of the whole
    machine Unloading is very convenient, which reduces fixed asset investment and has the highest cost   
     performance.



Application Ramaterial:
1.Raw materials scope: Corn stalks, rice straw, peanut hulls (seedlings), cotton stalks, bark, sawdust, RDF,     
   domestic waste,paper mill waste, furfural dregs, corn cobs, cow dung, rice husks, etc.
2. Suitable parameter: 15-25% moisture, and less 50mm length.



Technical Parameter:
Final Different Size Briquette Product for Fuel : 



FAQ:
Before quote, pls kindly confirm follows information to us firstly:
1. What's your raw material for making briquette product?
   - Wheat straw, cotton stalk, corn cobs, peanut stlak, rice husk , sawdust, rice straw etc.

2. What's the size and moisture content of raw material? 
    - Size: note bigger than 5cm;
     - Moisture content: 15-25% 

3. What's the szie of final pellet and briquette ?
     - Pellet diameter: 8-26mm;
     - Briquette size: 24*24mm; 28*28mm; 32*32mm.

4. What's the size of biomass briquette machine ? 
     - 2.5-3Ton/Hour; 3-4Ton/Hour; 4-5Ton/Hour;

5. What's the certification of your briquette machine? 
   - CE Certification .

Pls Contact Rita if you are instersted in our Briquette Making Machine: