S Series cone crusher apply to crushing super hardness materials which above medium hardness, such as granite, basalt, quarzite, iron ore, cobble stone etc. The cone crusher is mainly used in mining, building material, metallurgy industry, sandstone processing, road and bridge engineering etc. 

 

 

The cone crusher is widely applied in metallurgical, construction, road building, chemical and phosphatic industry. Cone crusher is suitable for hard and mid-hard rocks and ores, such as iron ores, copper ores, limestone, quartz, granite, gritstone, etc. Type of the crushing cavity is decided by the application of the ores. Standard type is for SZ (secondary crush); Middle type is for SD (tertiary crush); Short-head type is for primary and secondary crush. S series gyratory cone crusher is widely used for crushing in mining, ores, hard rock materials, building materials, cement factories, sandstone quarries, cement mixing stations, dry mortar, power plant desulfurization, quartz sand, etc. 

 

 

Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed. 

 

Structure of cone crusher: 
 

Frame, the horizontal axis, moving cone, balancing wheels, eccentric sleeve, upper broken wall (fixed cone), the lower broken wall (fixed cone), hydraulic coupling, lubrication systems, hydraulic system, control system and so on. 

 

Cone crusher Special advantages 

 

A). Reliable quality approved by ISO9001: 2000. 

B). Grease seal can effectively avoid the blockage of water feeding system and drainage system, as well as mixing of water and oil. 

C). Large and medium-sized crushers adopt hydraulic chamber-cleaning systems, which will help reduce the down time 

D). Cone crushers with different chambers are available, to meet our customers' requirements. 

E). As the overload protection device, spring safety device allows foreign matter and iron pieces to pass through the crushing chamber without jeopardizing machines. 

F). In normal condition, the operation rate of trouble free is more than 95%.