LB - PC efficient filter cartridge dust collector use modular systematic comprehensive production system, improve the product quality. Equipment using advanced internal fold type filter cartridge as the filter element, compared with the traditional pulse bag filter, it can remove tiny fibrous dust and has the advantages of small volume, big filter area, high dust collection efficiency, low pressure loss, reliable operation, long service life. 
Widely used in machining, casting, chemical, ceramics, brake materials processing, powder spraying and other industries of dust control and recovery as well as the welding smoke purification, after treatment the gas could reach the national emission standards, is a new form of pulse dust catcher 
*Function characteristics:
1)Low emission concentration, can the filter the dust smaller than 0.2 um.
2)Good permeability, low gas resistance.
3)Soot is convenient, automatic dust clean; Ensure the continuity of production and efficiency.
4)Dust collection container is convenient to disassemble, compact connection with filter funnel, dust does not leak.
5)Filter cylinder surface is smooth, good waterproof and oil proof performance. 
6)Vertical installation for filter cartridge, compared with the traditional series with filter cartridge lateral or oblique installation way, counter blowing clean more thoroughly.

Technical parameters: 
 Automatically Clean for Cartridge Filter
 
Cartridge cleaning by blowing device controlled by the pulse controller implementation: when the unit operation after a period of time, the subtle dust adsorption on the surface of the filter material, reduces the permeability of the filter material. At regular intervals by the pulse signal controller, control solenoid valve, clean compressed air spit out from the valve mouth; Adsorption on the surface of the filter material under the action of dust in the air is cleared, fall in the dust hopper at the bottom of the chamber body. Pulse injection should be 0.4 ~ 0.6 MPa cleaning compressed air and must remain in the operation of the continuous and constant air supplies. 








The working principle of the dust collector 
 
Dust gas into the filter housing through the lower inlet, from down to up, due to the effect of gravity and downdraughts, the larger dust particles down to inside the ash hopper directly, the tiny dust was capture on the surface of the filter cartridge, the clean gas purification by filter cartridge filter, through the filter tube center into the clean room, then exhaust out. 
 
With filter conditions continue, the dust gathered on the surface of the filter cartridge more and more, the pulse controller according to the set of pulse cycle and pulse interval control solenoid valve open, jet high pressure gas, blow into the filter cylinder cavity, shake off the appearance dust, fall into the ash hopper.

 Company Information:
 
Qingdao Loobo Environmental Protection Technology Co.,Ltd is one of the biggest enviromental protection products manufacturer, located in Qingdao city of china,specialized in alll kinds of portable fume extractor, downdraft benches(grinding dust removal worktable), central fume purification system, flexible suction arm,etc.
 
We have more than ten years export experience ,all of our products with the ISO9001 and CE certification, the quality can be guaranteed.
 
We have our own R&D department , have a variety of style range to meet any of your requirments and had established the economies of scale, so can dilivery fast and provide can beat your competitor's price.
 
Best Regards
 
Miss Rice
 
Qingdao Loobo Environmental Protection Technology Co.,Ltd
Factory Address: No 1,Loobo road,Jinling industry Park,Chengyang,  Qingdao, China
Phone:+86 15953214653
Tel: +86-532-8068 6722
Fax    : +86-532-8068 7597