RN200 shoulder amphibious cutting machine

This product is the most portable, safest and waterproof underwater cutting equipment in the diving industry. It can also be used on land. It is made of cutting gun, 6.8 liter small carbon fiber oxygen cylinder, flame retardant back frame, waterproof electromagnetic and super It consists of a hot cutting rod with a weight of about 8 kg. The cutter has proven to be the fastest, most efficient and cost-effective means of accomplishing underwater missions. Used to cut, puncture, or plan the widest range of materials. Ultra-hot cutting rods produce temperatures in excess of 10,000 degrees Fahrenheit, enough to quickly cut or melt almost any substance, including steel, cast iron, stainless steel, brass, and other blacks. Non-ferrous metals, concrete, etc., can also cut aquatic organisms, aquatic plants, rust and iron oxide scales, eliminating the need to clean them beforehand, thus reducing operating costs and reducing underwater residence time.

 

Products

Rino nonpressure gasoline welding & cutting machine adopts the newest technology, craftwork. We meet requirement of the state "The Eighth Five" plan: "About limit development of acetylene and looking for new substituted energy", based on gasoline nonpressure self-suction, oil-Oxygen high degree blending burn to produce high temperature flame in order to process metal. It has change disfigurement of the existed gasoline welding & cutting machine and reach the real simple and fast. Its wizardly functions such as nappe cutting, underwater cutting, punching on thick steel sheet are inimitable. It is the Cenozoic product that will replace acetylene cutting tools with its most perfect, safe, energy saving and mancarried. It has gotten the national patent (The patent number is 200420110358.1), after inspection of The Mechanical Industry Flame Cutting Machine Quality Checking Center; all indexes are complied with national standards. And it has been on the list of the national torch plan. After inspection by China Zhong Qing Products Quality Guarantee Center, it was appraised as AAA trademark and listed on the keystone extending project of China Energy Saving Association.

Nonpressure gasoline welding & cutting machine Main predominance:

I. Low cost:

Gasoline is an economic fuel, after validating, 3 L gasoline (about 18 yuan) 's workload is equal to 1 bottle of acetylene (about 90 yuan). It can saving energy more than 80%. And itcan save energy more than 50% to compare with dimethylmethane, LPG and Shope gas.

II. Easy operation:

There are no power, no pressure in gasoline tank and without boring set-up service before using. The torch structure is reasonable. It predigests the site clear work after using. 

III. Safe and reliable:

There is all with liquid from the gasoline tank to the cutting tip, and liquid is not backfire, so the machine has no phenomena of backfire. The gasoline tank is filled with high technology flameproof material that was recommended by the Ministry of public security and Ministry of labor. The gasoline will burn slowly even directly ignite to gasoline in the tank, no exquisite burning and blast. (If the oil tank equipped this kind of flameproof material, you can weld to it even with oil.) In addition, when the cutting torch is working, even the oil tube is cut off immediately, the cutting torch will work for several minute till the gasoline used up. There is no risk of splash. It is the advance than other gasoline torch.Gasoline tank is equipped with a normal constant pressure safety valve, on the one hand which is able to eliminate the gasoline tank in a closed state after working long hours under the negative pressure generated by the tank, the other hand, which can guarantee the tank is not to leak out while gasoline tank is careless dumped of petrol.

IV. Good cutting quality:

There are no undercut, burning sink in upside; and there are no nodulation, hung bits in downside. The cutting surface is clear without acierate and cirrhosis. It can reduce material wasting and processing difficulty hugely.

V. Adaptability extensively:

It can be used not only for cutting , welding and heating all thickness of carbon steel, but also for heat melt and flame processing of golden and silver headgear, glass, quartz, electric products, dimension stone. It can be used in metallurgy, shipbuilding, boiler, automobile, machine work, chemical plant, architecture, and farm machinery and repairing. The market mechanism is very amplitude. There are handgrip type, semi automatic, duplicating and bake torch model for cutting and heating. The Max. cutting thichness is 300mm, the welding torch can weld 1-5mm steel sheet, it can also be used for silver soldering, braze, lead welding and non-ferrous metal welding. 

VI. Fast working:

The flame temperature of gasoline cutting torch is 3000-3300ºC. The warm-up time for cutting is short. Cutting speed is fast. After practice, the cutting speed can reach 500mm/min when cutting 20mm steel sheet under 20ºC. The gasoline bake torch has driving firepower, it can save time 30-50% to compare with acetylene when heating workpieces that can save more than 90% energy.

VII. convenient transportation: 

The gasoline welding & cutting machine is makeup by blast proof gasoline tank, oil-resistant rubber hose and welding & cutting torch, the total weight is only 6 kg. So it is very convenient for conveyance and taking. At the same time, gasoline can be purchased everywhere easily.

VIII. Green environmental protection:

Along with the extensive use of this product, people can save plenty of electrical power and mineral resources, reduce pollution from acetylene. And there is no resid and black smoke, no harm to the circumstance. It is contribution in the contemporary era to gain in the future.

1.. Reply your inquiry in 12 working hours;
2. Experienced staffs answer all your questions;
3. Customer's design is available for certain products(OEM);
4. Spare parts for all types of engine machinery with reasonable price;
5. Different brand of trucks can be provided with competitive price.

Contact Person