Products

Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller

China Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller, Find details about China Solar Inverter, MPPT Solar Inverter from Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller

Model NO.
PV3000 1-6KW
Nature of Wave String
Sine Wave Inverter
Function
Inbuilt MPPT Controller
Charger
Max 40AMP MPPT Solar Charger
Wave
Pure Sine Wave
Power
1kw-3kw
DC Voltage
12/24V
Display
LCD
Used for
Solar Sstem, Collected with Solar Panel
Max Current
10A with Charger Inside
Peak Power
3 Times as Normal
Interface
Teminal
Trademark
MUST
Transport Package
Carton Packing
Specification
570*315*300mm
Origin
China
HS Code
8504403090
Model NO.
PV3000 1-6KW
Nature of Wave String
Sine Wave Inverter
Function
Inbuilt MPPT Controller
Charger
Max 40AMP MPPT Solar Charger
Wave
Pure Sine Wave
Power
1kw-3kw
DC Voltage
12/24V
Display
LCD
Used for
Solar Sstem, Collected with Solar Panel
Max Current
10A with Charger Inside
Peak Power
3 Times as Normal
Interface
Teminal
Trademark
MUST
Transport Package
Carton Packing
Specification
570*315*300mm
Origin
China
HS Code
8504403090
Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller

"Hybrid inverter Specifications

1 Maximum power point Tracking (MPPT) function.
It is an electronic system that operates the photovoltaic(PV) modules in a manner that allows the modules to produce all the power they are capable of. The solar mate charge controller is a microprocessor-based system designed to implement the MPPT. It can increase charge current up to 30% or more compared to traditional charge controllers.


Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller
Must Factory Price 1kw-6kw Solar Inverter Inbuilt MPPT Controller
AC/Battery Priority

Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first.
When you choose battery priority(Battery type selector on 7-9), then inverter will invert from battery despite the AC input. Only when the battery voltage reaches low voltage alarm point will be inverter transfer to AC input, charge battery and switch back to battery when the battery is fully charged. This function is mainly for wind/'solar systems using utility power as back up. "
Hybrid Inverter(PV3000 series)
MPPT solar controller function
Rated Voltage12/24V DC
Rated Charge current 40A
Load current15A
Input voltage range15-55V DC
Max. PV open circuit array voltage55V DC
Typical idle consumptionAt idle< 10mA
Overload protection(DC load)2.0*Inom>5s                            1.5*Inom>20s                       1.25*Inom temperature controlled
Bulk charge14.6V(default)29.2V(default)
Floating charge13.4V(default)26.8V(default)
Equalization charge14.0V(default)28.0V(default)
Over charge disconnection 14.8V29.6V
Over charge recovery13.6V27.2V
Over discharge disconnection10.8V(default)21.6V(default)
Over discharge reconnection12.3V24.6V
Temperature compensation13.2mV/C26.4mV/C
Lead acid battery settingsAdjustable
NiCad battery settingsAdjustable
Load control mode 1.Low Voltage Reconnect(LVR):Adjustable  2.Low Voltage Disconnect(LVD):Automatic  disconnection                 3.Reconnection:Includes warning flash before disconnect and reconnection
Low voltage reconnect12.0-14.0Vdc24.0-28.0Vdc
low voltage disconnet10.5-12.5Vdc21.0-25.0Vdc
Ambient temperature0-40 degree(full load)  40-60 degree (de-rating)
AltitudeOperating5000m,Non-Operating 16000m
Protection classIP21
Battery temperature sensorBTS-optional remote battery temperature sensor for increased charging precision
Terminal size(fine/single wire)#8 AWG
 
Welcome to contact me freely.
MUST Power Limited
Hedy Huang
+86-151 1813 5723

You Might Also Like