China Belt Dryer for Wood Chips (DW2-16), Find details about China Dryer, Drying Machine from Belt Dryer for Wood Chips (DW2-16)
1. Material data and requirements
| No. | Items | Data |
| 1 | Raw material | Wood chips less than 50*50*50mm |
| 2 | Moisture content before drying | 40% |
| 3 | Moisture content after drying | 15% |
| 4 | Heating method | Flue gas, 240 degrees C, 2200m3/h |
| 5 | Capacity (before drying) | ~1360kg |
| 6 | Capacity (after drying) | ~960kg |
| 7 | Moisture dried | ~400kg |
| 8 | Equipment material |
2. Equipment specifications
| No. | Items | Data |
| 1 | Model of dryer | DW2-16 single layer belt dryer, width 2m, valid length 16m. |
| 2 | Drive system | Chain drive system. Reducer is equipped on the end of discharge, and chain wheels are connected with chains. Stainless steel netting is installed on the rods. Drive system power: 1.5Kw. |
| 3 | Heating method | Hot flue gas is distributed to separate drying units through gas pipes. |
| 4 | Circulating fan | Model: 4-72-6A-4Kw, 8 units, flow 10000m3/h, pressure 1000Pa |
| 5 | Moisture exhaust fan | Model: 4-72-6A-4Kw, 1 unit, flow 10000m3/h, pressure 1000Pa |
| 6 | Installed capacity | 37.5Kw |