Products

Megatro Monopole Tower for GSM (MG-GSM003)

China Megatro Monopole Tower for GSM (MG-GSM003), Find details about China Monopole for GSM, GSM Telecom Tower from Megatro Monopole Tower for GSM (MG-GSM003)

Model NO.
MG-GSM003
Condition
New
Accessories 1
Power Fitting
Accessories 2
Anchor Bolts and Template
Accessories 3
Tower Foundation
Accessories 4
Cable and Conductor
Trademark
MEGATRO
Transport Package
Export Package at Client Option
Specification
AS PER CLIENT REQUIREMENTS
Origin
Shandong, China
HS Code
73082000
Model NO.
MG-GSM003
Condition
New
Accessories 1
Power Fitting
Accessories 2
Anchor Bolts and Template
Accessories 3
Tower Foundation
Accessories 4
Cable and Conductor
Trademark
MEGATRO
Transport Package
Export Package at Client Option
Specification
AS PER CLIENT REQUIREMENTS
Origin
Shandong, China
HS Code
73082000
Package size per unit product
8900.00cm * 600.00cm * 600.00cm
Gross weight per unit product
1600.000kg


GSM towers also being steel support for a mobile network system distributed over land areas, now most of monopole also being GSM towers, it is free standing tower.
MEGATRO monopole GSM tower is one single pipe as space truss structure.Its advantage is lower cost with less space, economic and easy install and maintenance, ladders and step bolts often set inside or outside as per customer.MEGATRO MONOPOLE GSM TOWER often fabricated by mild steel or high strength steel, such as ASTM A36, ASTM A572 GR50, 65 or other.

MEGATRO MONOPOLE GSM TOWER systems can accommodate a variety of mounts and accessories.After fabrication, all monopoles are delivered to the galvanizing facility to be Hot DIP Galvanized or they will be painting or powder by clients special requirements.

Other information:
Place of Origin:Qingdao, Shandong, China.
Height:2 to 50 meters
Availability size:Based on the customer's requirements
Material:Chinese material or as per clients requirement
Fabrication:Based on the customer's drawings and technical requirements
Package:Both parties discuss and agreed before delivery
Terms of Payment:L/C, T/T
Minimum Order Quantity:1 set
Port of Loading:Qingdao Port
Delivery Time:One month or based on the customer's needs
MEGATRO provide monopole tower for GSM design with below requirements

Design Requirements and Basic of Design
MEGATRO TOWERS will guarantee the overall safety of the tower.MEGATRO TOWERS will submit design calculation report for member design of tower and overall structural stability of the structure, which is signed by a charted structural Engineer.
MEGATRO will supply the skeleton to scale, showing the assembly of the structures, the antenna mounting levels, other detail drawings etc.
The calculation method to be adopted for tower design will be decided by MEGATRO TOWERS with the consent of the client.
All materials will comply with British Standard (hereinafter called BS), Japanese Industrial Standard (hereinafter called JIS) or equivalent standards.The permissible stress of the materials will comply with BS, standard by Architectural Institute of Japan (hereinafter call AIJ) or equivalent.The standards adopted for all materials will be stated separately.

General Design Criteria
Mast will be designed based on GB, BS 8100, TIA/EIA-222-G-2006, IS 802 & IS875 or equivalent international standards.
The wind loading on the tower and antennas mounted on it will withstand a ground level wind velocity of 140 Km/h and survival speed of 180 Km/h including with height in accordance with latest BSI CP3:Chapter V:Part 2:British Standard (BS)
Antenna that will be considered when it calculates wind areas will be Six GSM antennas, Two each 600 mm diameter microwave dishes & one 1.2m Ø Microwave plus all the feeders for GSM and MW antennas.
Allowance will be given to the effective windage area of the following:
Feeder runway
Feeders
Platforms and guard rails
Ladder and ladder guards
MEGATRO submit the complete data showing the drag factor from various angles of wind on the antenna offered.
Megatro Monopole Tower for GSM (MG-GSM003)

You Might Also Like