Products

Jaguar A6 Leas Free Economical and Small SMT Reflow Oven

China Jaguar A6 Leas Free Economical and Small SMT Reflow Oven, Find details about China Economic Reflow Oven, PCB Soldering from Jaguar A6 Leas Free Economical and Small SMT Reflow Oven

Model NO.
Jaguar A6
Specification
3500× 750× 1320mm
Origin
China
Model NO.
Jaguar A6
Specification
3500× 750× 1320mm
Origin
China

                Lead Free Reflow Oven JAGUAR A6 with 6 Zones
Jaguar A6 Leas Free Economical and Small SMT Reflow Oven

Specification:                                                                    

ModelJAGUAR A6
 
 
Heating System		Number of heating zonesUP 6/BOTTOM6
Length of heating zones2400MM
Heating modeUp:hot air; bottom: IR
Cooling ModeForce air
 
 
 
Conveyor System		Max. Width of PCB350mm
Mesh belt width400mm
Transmission DirectionL→R(or R→L)
Transmission Net Height880±20mm
Transmission typeMesh
Conveyor speed0-1000mm/min
Fixed rail sideFront rail fixed(option:rear rail fixed)
 
 
 
 
 
 
 
 
Control system		Power supply5 line 3 phase 380V 50/60Hz
Total power20kw
Starting power16kw
Normal power consumption4KW
Warming timeAbout 20 mins
Temp. setting rangeRoom temperature-300ºC
Temp. control methodPID close loop control & SSR driving
Temp. control precision±1ºC
Temp. deviation on PCB±2ºC
Data storageProcess Data and status storage
(80 GB)(machine with PC)
Nozzle plateAluminum Alloy Plate
Abnormal AlarmAbnormal temp. (extra-high/extra-low temp.)
Board dropped alarmTower light:yellow-warming, Green-normal,  Red-abnormal
 
General		Dimension(L*W*H)3500×750×1320mm
Weight600KG
ColorComputer gray

Introduction:
No.1 The unique advanced long life heating system
1.The heating system adopt the Swedish nickel heater with efficiency and energy-saving. The peak      wave length of the radiation power is 4UM with curved surface reflector to the rising temperature        speed, improve the thermal efficiency. And the special forced-air circulation system make PCB          and the component heated uniform and eliminate the "shadow effect" completely .
2.Using special high temperature resistant protection system in heating preservation system and         special iron in furnace .

3.Using imported Taiwan SanYue long axis of high temperature fan motor and W shaped heat               pipe, Model design, no noise, shockless and easy for maintenance .
4.Whole oven are porous aluminum transfer the hot air to guarantee the hot air evenly to the PCB .       the whole top oven fixtures can open completely so that easy to clean the oven inside .
 
No.2 Smooth and reliable transmission system
1.The transmission system use STK adjustable speed motor imported from Taiwan matched with the     1:150 turbine reducer can running smooth ,speed range can be arrived at 0-1000mm/min. 
2. Independent wheel structure support and match stainless belt to make the running smoothly and        the speed precision is up to ±20 mm/min .
3.Special stainless belt: durable and wear-resistant, not easy to deform and long life. 

 
No.3 Stable and reliable electrical control system
1.It adopts imported thermostat control which owns fuzzy control and PID intelligent precision control system.It can fast response the changes in external heat and ensure more temperature balanced by PID intelligent operation and automatic control heating .
2. Using thermocouple imported from Taiwan by each temperature zone, it can fast and sensitive induct the changes in each temperature zone, transfer and control timely, compensate the temperature balance in each zone .
3. Special SSR solid state relay matched with dedicated radiator improve the heat efficiency greatly and prolong the lifetime effectively. No contact output and fuzzy control function by thermostat, can monitoring the changes of outside temperature and calorific value, controlling the heating device by minimum pulse, ensuring the high precision of the temperature control & the uniform temperature in internal and the length ,direction, temperature distribution, all of these meet IPC standards .
4. Power is abundant, heat up fast, it's only need 20 minutes from room temperature to constant temperature.
5. Failure diagnosis and sound light alarm.
6. Delay shutdown production function, uniform cooling after the shutdown: prevent component deformation.
     
Packaging & Shipping

                          vaccum packing + wood 

Jaguar A6 Leas Free Economical and Small SMT Reflow Oven
Our Services

Jaguar A6 Leas Free Economical and Small SMT Reflow Oven

Before buying the product, we will be a comprehensive analysis of the views and requirements and recommend it to the actual needs of customers with the most suitable products and let customers know that the performance characteristics of the selected product referred to in accordance with customers. 

In purchasing the products, we promise to allow customers to clearly know the completion of the product. In strict accordance with the relevant provisions of the contract terms of production, delivery, to ensure product intact and in place within the stipulated time to customer requirements. 

Product during the warranty period, under normal storage, maintenance, use, if quality problems, responsible for the free repair or replacement, and provide the relevant maintenance knowledge; as a result of improper use or damage caused by the product does not work normally, the Company provides paid service. Product warranty period is not, it will provide a paid service.
our partner
Jaguar A6 Leas Free Economical and Small SMT Reflow Oven
Jaguar A6 Leas Free Economical and Small SMT Reflow Oven
Contact Info:
Paul
Shenzhen Jaguar Automation Equipment Co.,Ltd.
Global Power SMT Equipment Leader
Add:14th Building,West of Furong Industrial park,Shajing town,Bao.an District,Shenzhen,Guangdong,China
Tel:+86-755-23316315   Fax:+86-755-29497125
 
 
 
Web:jaguarsmt.en.made-in-china.com
        jaguarsmt.en.made-in-china.com

You Might Also Like