Cattle crush has an internal width 750mm,
overall length about 3.05m, 4 doors on the operating side and no doors on the other side.
The cattle crush is supplied as 4 pieces kit(headbale, 2 sides & a slide gate)which just pins together.
 

Cattle head bail
Pre galvanized,Fully 360degree welded
2050mm high, 1060mm wide
All the tubes are 50x50mm
Galvanized sheet
With welded caps, lugs, flat feet and pins hang on the lugs
 
Sliding gate
Pre hot dipped galvanized
2050mm high, 1060mm wide
Frame tube: 50x50mm
With welded caps ,flat feet ,U lugs and pins hang on the lugs
 
Cattle panel on one side
Pre galvanized, Fully 360degree welded
2000mm high, 3050mm long.
All the tubes are 50x50mm
With caps, lugs and pins
 
Cattle panel gates on the other side
Total 2000mm high, 3050mm long.
All the tubes are 50x50mm
Doors with spring latched lock
With caps, lugs and pins