China Paint Coating/Resin/Hot Melt Adhesive SUS304/SUS312 Stainless Steel Ribbon Stirring Reactor Stirrer Chemical Equipment, Find details about China Reactor, Mixer Machine from Paint Coating/Resin/Hot Melt Adhesive SUS304/SUS312 Stainless Steel Ribbon Stirring Reactor Stirrer Chemical Equipment
1) Reactor is the main chemical reaction of the typical production equipment, which is widely used in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production.
2) To break down or combined the materials through mixing, filling and cooling, to promote the reaction of polymerization.
3) The reactor consists of body, gears, mixing devices, heating devices, cooling devices, seal composition.
4) Corresponding auxiliary equipment: distillation column, condenser, water separator, collecting cans, filters ect.
In order to overcome the problem of tires of various vehicles being punctured by iron nails and other sharp objects, tire self-rehydration is the most ideal accessory. If the tires are pre-added with a proper amount of glue, when the tires are punctured, the special substances in the glue can be used Quickly and effectively block the breach and solidify into a film to fill the breach. At the same time, the tire will not leak if it is punctured in the future, there is no need to repair the tire, and it can extend the service life of the tire. The tire self-refilling is suitable for all kinds of tires, which is very convenient.How to use tire self-rehydration:
1.)Unscrew the tire valve core and drain the air inside the tire.
2) Before the glue is injected, it must be fully shaken evenly, then tear off all the film of the bottle mouth and bottle cap, put the hose on the bottle cap, the other end of the hose on the tire valve, squeeze the bottle by hand Inject it into the tire in a physical way.
3) After the glue is squeezed into the tire, remove the residue on the valve nozzle, screw on the valve core, and then use an air pump to inflate the tire to the specified air pressure, and then rotate the tire to disperse the glue.
model | nominal capaci | actual capci | heating power | jacket capaci | inner pot size | jacket size | hole center | volume |
50L | 50 | 78 | 2*4 | 96 | 400 | 600 | 828 | 10 |
100L | 100 | 127 | 2*6 | 127 | 500 | 700 | 928 | 15 |
300L | 300 | 327 | 4*6 | 218 | 800 | 1000 | 1148 | 20 |
500L | 500 | 509 | 4*9 | 269 | 900 | 1100 | 1252 | 25 |
1000L | 1000 | 1017 | 4*12 | 400 | 1200 | 1400 | 1588 | 40 |
2000L | 2000 | 2154 | 4*15 | 850 | 1400 | 1600 | 1840 | 80 |
3000L | 3000 | 3201 | 5*15 | 1015 | 1600 | 1750 | 2040 | 100 |
4000L | 4000 | 4020 | 5*15 | 1226 | 1600 | 1750 | 2070 | 120 |
5000L | 5000 | 5170 | 5*18 | 1400 | 1800 | 2000 | 2320 | 140 |
Design capacity 50-30000L(volume in accordance with the requirements of the design)
Reaction temperature room temperature-300ºC
Reaction pressure -0.1~0.6Mpa
Equipment materail SUS304 stainless steel,SUS321 stainless steel ,SUS316,Q235-B carbon steel
Stirring form --anchor paddle ,block ,ribbon ,turbine tybe,a dispersing disc,modular like,
Heating methods electric heating ,steam heating ,heated in water
Heat transfer medium oil,steam,hot water,electricity and heating
Heat transfer structure jacket,outer half -tube,inner coil type