1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA

China 1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA, Find details about China EDFA, Fiber Amplifier from 1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA

Model NO.
FWA-1550H Series
Nominal Optical Input Power (dBm)
+3
NF(dB) (+3dBm,@1550nm)
3.8~5.5
Optical Connector (in/out)
Sc/APC
Trademark
FULLWELL ( OEM, ODM available)
Transport Package
1PC/Carton, 1carton in a Outer Box
Specification
CE, RoHs
Origin
Zhejiang, China
HS Code
8517622900
Model NO.
FWA-1550H Series
Nominal Optical Input Power (dBm)
+3
NF(dB) (+3dBm,@1550nm)
3.8~5.5
Optical Connector (in/out)
Sc/APC
Trademark
FULLWELL ( OEM, ODM available)
Transport Package
1PC/Carton, 1carton in a Outer Box
Specification
CE, RoHs
Origin
Zhejiang, China
HS Code
8517622900
EDFA 1550nm CATV Erbium Doped Fiber Amplifier
FWA-1550H Series

1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA

-------------------------------   Products Description  ---------------------------------
FWA-1550H series 1550nm Erbium ytterbium co-doped fiber amplifier has advantages of low noise, high gain, wide bandwidth, efficient pump and stable working condition, etc. It is used on CATV system widely. As the transmitting nodes in the CATV system increase constantly, fiber to the home (FTTH) and fiber to the building (FTTP) are popular. When the EDFA is used to cascaded amplification in the CATV system, the C/N deterioration is serious, so the EDFA must have high saturated output power, low distortion, while the saturated output power of EDFA is usually between 13dBm and 23dBm, output power limit is about 27dBm. In addition, the gain fiber of EDFA is single-mode and single-clad fiber, pump is directly coupled into fiber core, while fiber core is very small, it is required the pump is single-mode. The output power of single-mode semi-conductor laser is just several hundreds mW, and it is limited by pump area, high power pump can't be coupled, thus it has a serious effect on the output of fiber laser. In the face of this kind of situation, a international new double-clad fiber has been developed. It takes advantage of envelope pump technology, which overcomes shortcomings of the single-mode fiber, and makes output power increased one to two orders of magnitude, and promotes the evelopment of high-power fiber amplifier. The factory overcomes multiple technical difficulties, and then developing erbium ytterbium co-doped double-clad fiber amplifier which is fit to CATV system to adapt current require of FTTH and FTTP.
FWA-1550H series of products produced by JDSU, Lumics, etc world famous semiconductor firms as the pumping source.
In the interior of the machine is equipped with the light power export stable circuit and laser Thermoelectric cooling device 
Temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitors the lasers' working state, the Digital Panel (VFD) displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles., a detailed report of the device parameters please read "instructions."


--------------------------------- Features ------------------------------------
 
With optical switching 2x1: 2ways optical input,hot backup automatic switch.
High quality: adopt multimode large power pump laser, power is optimized reasonably by software, and can most unlimited
 reduce NF of EDFA, it is comparable with EDFA. The feature can make system achieve excellent CNR.
Reliability: The 19 "1U standard rack, built-in high-performance dual switching power supply,it can work at 85 ∽ 265Vac City 
Network Voltage, As well as an optional DC48V power supply (reservations required); chassis cooling can be automatic control
 by temperature.
Intuition: The pump laser is the most expensive machine components, machine equipped with microprocessor monitors the
 working state of the laser, the panel LCD window displays the operating parameters.
Network type: Select All-piece status monitoring transponder guarantees to meet the national standard and be compatible
 with the SCTE HMS standard, it enables network management to monitor capabilities.
The plug is draw-out type: switching power supply is draw-out type with aluminum profile structure, it helps greatly to cooling 
and replacement. Besides it can make dual supply cold-heat backup.
Adjustable output optical power: You can adjust the range of output optical power (downwards -3dB), it is required specification 
when user orders.
High output power: Matched output power maximum is 27~40dBm.

 
----------------------------  Set and Operation ----------------------------------
 
Equipment  FWA-1550H
type  Item
Wavelength (nm)1545~1555
Optical  Input  Power (dBm)-10~+10(Normally -5~+10)
Nominal  Optical  Input  Power (dBm)3
NF(dB) (+3dBm,@1550nM)3.8~5.5
Gain  Flatness (dB)<±0.3
Optical  Output  Power  Stability (dB)<±0.5
Polarization  Sensitivity (dB)<0.2
Polarization  Mode  Dispersion (ps)<0.5
Optical  Connector  (IN/OUT)SC/APC
Working  Pump  Quantity (N)1~3(According the request)
Saturated  Output  Power (dBm)27....40 according your demands
Power  Source (Vac)115~265(Vac) or 48(Vdc)
Working  Temperature (ºC)0~50
Size(mm)482.6×387×44

--------------------------  Product Series -------------------------------------
 
TypeTotal Output
(mW)
Output No.Each Output(dBm)
 FWA-1550H-27500419.5
816.0
 FWA-1550H-28630420.5
817.0
 FWA-1550H-29800421.5
818.0
 FWA-1550H-301000819.0
1615.5
 FWA-1550H-311250820.0
1616.5
 FWA-1550H-321600821.0
1617.5
 FWA-1550H-332000822.0
1618.5
 FWA-1550H-3425001619.5
3216.0
 FWA-1550H-3532001620.5
3217.0
 FWA-1550H-3640001621.5
3218.0
 FWA-1550H-3750001622.5
3219.0
 FWA-1550H-3860001623.5
3220.0
 FWA-1550H-3980001624.5
3221.0

-------------------------- Certifications --------------------------------
1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA

--------------------------- FAQ -------------------------------------------

1. What are your terms of payment?
Usually, we can accept T/T, PayPal and Western Union. You can select the terms of payment which is more convenient for you.

2. What about the lead time?
Usually, if there is stock of goods, we will deliver the goods within 3~5 work days after we receive the payment.

3. How about the shipping?
Usually, we will deliver the goods via International Express like FedEx, DHL, TNT, and UPS and so on. Door to door delivery service will be provided.

4. How can I place an order?
(1) Agreement is achieved on the product price and product specifications.
(2) We make proforma invoice for your confirmation.
(3) When you agree on the proforma invoice, you make the payment.
(4) We deliver the goods after we receive your payment.

5. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.


6. What are the advantages of your products?
A. Good quality and competitive prices.

B. Strict quality control during production process.
C. Professional operations in processes of production, sales, assembling, packaging and shipping.
D. Good after-sale service. Professional online technical support can be provided. Moreover, if there is any problem of the goods, we will help to solve the problem or provide replacement of the goods.



--------------------------- Contact Us ----------------------------------


1550nm CATV Erbium Doped Fiber Amplifier CATV EDFA

"Design and manufacture the most reliable and efficient FTTH CATV equipment products in the industry."