Products

CATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass

China CATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass, Find details about China CATV Optical Receiver, CATV Transmitter and Receiver from CATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass

Model NO.
WR1002RJIII-WD
Trademark
Prevail/Fobetmoc
Transport Package
Neutral
Specification
indoor type
Origin
China
HS Code
8517622990
Model NO.
WR1002RJIII-WD
Trademark
Prevail/Fobetmoc
Transport Package
Neutral
Specification
indoor type
Origin
China
HS Code
8517622990
1. Product Summary
WR1002RJII optical receiver is our latest 1GHz FTTB optical receiver. With wide range receiving optical power, high output level and low power consumption. It is an ideal equipment to build the high-performance NGB network. There are three models optional:
WR1002RJII/NC: The RFTV operating wavelength is 1100 ~ 1620nm.
WR1002RJII/WF: Built-in optical signal filter, the RFTV operating wavelength is 1550nm.
WR1002RJII/WD: Built-in CWDM, RFTV operating wavelength is 1550nm. Pass 1310/1490nm wavelength. Can be connected with EPON, GPON and ONU. 
2. Performance Characteristics
  • Adopt advanced optical AGC control technique, the maximum AGC control range (adjustable) is -9~+2dBm;
  • RF amplifier part adopts the high performance low power consumption GaAs chip, the highest output level up to 112dBμV;
  • EQ and ATT both use the professional electric control circuit, make the control more accurate, operation more convenient;
  • Built-in the Ethernet transponder, support remote network management (optional);
  • Compact structure, convenient installation, is the first choice equipment of FTTB CATV network;
  • External high reliability low power consumption power supply;
3. Technique Parameter
ItemUnitTechnical Parameters
Optical  Parameters
Receiving Optical PowerdBm-9 ~ +2
Optical Return LossdB>45
Optical Receiving Wavelengthnm1100 ~ 1600 or 1530 ~ 1620
Optical Connector Type SC/APC
Fiber Type Single mode
Link  Parameters
C/NdB≥ 51Note 1
C/CTBdB≥ 60
C/CSOdB≥ 60
RF  Parameters
Frequency RangeMHz45 ~862/1003
Flatness in BanddB±0.75
Rated Output LeveldBμV106 (FZ110)102 (FP204)
Max Output LeveldBμV112 (-7 ~ +2 tap)108 (-7 ~ +2 two-way splitter)
Output Return LossdB≥16
Output ImpedanceΩ75
Electrical control EQ rangedB0~15
Electrical control ATT rangedB0~15
 
General Characteristics
Power VoltageVDC12V/1A
Operating TemperatureºC-40~60
ConsumptionVA≤7.5
Dimension mm 142(L)* 98(W)* 36(H)
Note 1: Configure 59 PAL-D analog channel signals in the 550MHz frequency range. Transmit digital signal in the frequency range of 550~862/1003MHz. The digital signal level (in 8 MHz bandwidth) is 10dB lower than analog signal carrier level. When the optical input power of the optical receiver is -1dBm, the output level: 106dBμV, EQ: 8dB.

ProcessCATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass
Company ProfileCATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass
Contact us
CATV FTTB FTTH 1GHz Indoor Wdm Optical Receiver Node with Pon Pass
 

You Might Also Like