CATV FTTB FTTH 1GHz Indoor Optical Receiver Node

China CATV FTTB FTTH 1GHz Indoor Optical Receiver Node, Find details about China CATV Optical Receiver, CATV Transmitter and Receiver from CATV FTTB FTTH 1GHz Indoor Optical Receiver Node

Basic Info.

Model NO.

WR1002RJII

Trademark

Prevail/Fobetmoc

Transport Package

Neutral

Specification

indoor type

Origin

China

HS Code

8517622990

Model NO.

WR1002RJII

Trademark

Prevail/Fobetmoc

Transport Package

Neutral

Specification

indoor type

Origin

China

HS Code

8517622990

Product Desciption

CATV FTTB FTTH 1GHz Indoor Optical Receiver Node

1. Product Summary
WR1002RJII optical receiver is our latest 1GHz FTTB optical receiver. With wide range receiving optical power, high output level and low power consumption. It is an ideal equipment to build the high-performance NGB network. There are three models optional:
WR1002RJII/NC: The RFTV operating wavelength is 1100 ~ 1620nm.
WR1002RJII/WF: Built-in optical signal filter, the RFTV operating wavelength is 1550nm.
WR1002RJII/WD: Built-in CWDM, RFTV operating wavelength is 1550nm. Pass 1310/1490nm wavelength. Can be connected with EPON, GPON and ONU.

2. Performance Characteristics

Adopt advanced optical AGC control technique, the maximum AGC control range (adjustable) is -9~+2dBm;
RF amplifier part adopts the high performance low power consumption GaAs chip, the highest output level up to 112dBμV;
EQ and ATT both use the professional electric control circuit, make the control more accurate, operation more convenient;
Built-in the Ethernet transponder, support remote network management (optional);
Compact structure, convenient installation, is the first choice equipment of FTTB CATV network;
External high reliability low power consumption power supply;

3. Technique Parameter

Item	Unit	Technical Parameters
Optical Parameters
Receiving Optical Power	dBm	-9 ~ +2
Optical Return Loss	dB	>45
Optical Receiving Wavelength	Nm	1100 ~ 1600 or 1530 ~ 1620
Optical Connector Type		SC/APC
Fiber Type		Single mode
Link Parameters
C/N	dB	≥ 51		Note 1
C/CTB	dB	≥ 60
C/CSO	dB	≥ 60
RF Parameters
Frequency Range	MHz	45 ~862/1003
Flatness in Band	dB	±0.75
Rated Output Level	dBμV	106 (FZ110)	102 (FP204)
Max Output Level	dBμV	112 (-7 ~ +2 tap)	108 (-7 ~ +2 two-way splitter)
Output Return Loss	dB	≥16
Output Impedance	Ω	75
Electrical control EQ range	dB	0~15
Electrical control ATT range	dB	0~15

General Characteristics
Power Voltage	V	DC12V/1A
Operating Temperature	ºC	-40~60
Consumption	VA	≤7.5
Dimension	mm	142(L)* 98(W)* 36(H)

Note 1: Configure 59 PAL-D analog channel signals in the 550MHz frequency range. Transmit digital signal in the frequency range of 550~862/1003MHz. The digital signal level (in 8 MHz bandwidth) is 10dB lower than analog signal carrier level. When the optical input power of the optical receiver is -1dBm, the output level: 106dBμV, EQ: 8dB.