Spec

Innosilicon, the industry leader of all coin crypto mining ASICs, launches a new powerful BTC miner with enhanced performance. It adopts the state-of-the-art technology and reaches 50TH/S in high hash mode. In case of energy saving, this miner also provide a high efficiency mode with 33 TH at 1650W.

• Hashrate:50TH/s (+/-5%)
• Power Consumption:3100W ( +/- 10%, normal mode, at the wall, with 93% efficiency PSU, 25°C temperature )
• Dimensions:265mm(L)*203mm(W)*277mm(H)
• Ambient Temperature:0-40°
• Network Connection:Ethernet
• Note:This miner not only can achieve 50TH (+-5%) at 3100W (+-10%) in high hash mode in case we want to maximize hash rate, but also has a high efficiency mode to reach 1650W (+-10%) for 33TH (+-5%) in case energy saving is needed.

Shipping&Packaging

1. Delivery time: Pre-order shipment will be made between late July and late August. First pay, first served!

2. Please be aware: T3-50T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C14 AC power cable to use with the PSU.

3. Please write the recipient's name, contact information and address carefully. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.

4.We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damage or losses of the goods during transport and import customs clearance will be charged to the buyers.

5. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.

Warranty

All Innosilicon T3-50T will be tested by factory before shipment and certified by Innosilicon. The post-sales service policy is as follows. After payment, your order will be processed immediately.

180 days parts warranty for any miners directly purchased from Innosilicon (counting upon miner arrival). If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you asap.

Please don't send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

Please don't send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

The price of miners may be adjusted at any time without prior notice or price compensation to customers.

The warranty expires in the following cases:

• Miner is demolished, privately altered or component replacement by customers;
• Lightning, voltage surges, poor quality power supply causing damage;
• Circuit boards and components damaged by water, exposed to moisture or corroded;
• The circuit board or the chip is completely burned;
• Excessive Over-clocking in an overheating environment.
• If above case happens, services of your miner maintenance will be charged. For the specific procedures, please refer to the after-sales process.