Suitable for needles

 Note: For your safety: please do not easily remove the cap of the needle before use.

            Insert the needle into Luer's metal connector and tighten.

            Unscrew the needle from the Luer connector

Link with bottle

1. Before you put the bottle into the spike, pierce the rubber cap of the bottle with a sterile needle.

2. Insert the bottle into the basket

3. Observe whether the basket and bottle are aligned, insert the bottle into the spike after aligning the center, and rotate the bottle body

Change the bottle

Instructions for use

 1. Set the dose: Turn the dose adjuster clockwise or counterclockwise until the piston is aligned with the scale printed on the barrel of the needle. For 03.ml: dose reversed clockwise live

   Adjust it to the front of the O-ring to align with the scale printed on the barrel.

 2. Syringe operation process:

   Remove the needle protection cover

   Slight tilt of the syringe

   Squeeze the handle and release quickly so that liquid is sucked out

   To remove air bubbles from the bucket, repeat steps, taking care not to waste liquid

   Filling the syringe to prepare the syringe

Precautions after use

1. Thoroughly remove all traces of material on the syringe with hot water cleaning agent, and rinse thoroughly with warm water

2. Soak the needle and syringe in water for 20 minutes. Ideally, the vacuum tube should be removed from the handle.

And separately sterilized by boiling in water.

3.Remove from the container