China 5 Years Warranty Outdoor 70W-80W-90W-100W Integrated Solar Powered LED Street Light with PIR Motion Sensor, Find details about China Solar Street Light, Prices of Solar Street Lights from 5 Years Warranty Outdoor 70W-80W-90W-100W Integrated Solar Powered LED Street Light with PIR Motion Sensor
China Factory Price All in One outdoor 8w-10w-12w Solar Powered LED Street Light lithium battery with PIR Motion Sensor
1.6W-100W All In One Integrated Solar Led Street Light With PIR Motion Sensor
Our integrated All-in-one 100% solar energy powered Solar Street LED Lamp which integrates the green-energy parts solar panel, Bridgelux/ Epistar LED chips, LiFePO4 (lithium iron phosphate) battery, intelligent control system, Panasonic sensor, etc.Into one aluminum alloy housing.Long service life, high-luminance, energy saving and maintenance free.Very easy to install and no cable needed.This lamp is brighter compared with normal sodium light, 1W led chip brightness as 5W of normal sodium light, and at the same time, it's convenient for transportation and high safety.
All in one solar Led street light features:
1, Integrated design:Integrated solar panel, LED, lithium battery, micro-controller and other accessories into one system.
2, Micro-computer controlled:Combine microwave sensor system, light control system and driver control system perfectly.
3, Solar panel angle adjustable:Rotate 240° horizontally, 200° vertically, ensure maximun efficiency of solar energy conversion.
4, High efficiency:Light efficiency reach 150lm/w, at same illumination, low watt available.
5, Modular design:All components are modular design and in standardized production.
6, Long time working:Working continuously for four to five rainy days.
7, Low cost:Compared with traditional solar LED lights, much lower cost, easy transport.
8, CE,ROHS,IP65 and ISO9001 certificates.
9, Long warranty: 5 years warranty.
Special note:
We do not bear any freight cost if product was damaged by human during warranty.But the freight(back and forth ) is for our account if prouct was damaged by itself.We will provide free parts to replace during 5 years warranty.
2. Specification For Components
1). LED Material Description:
1.) Lamp bead board: Alithium plate. heat dissipation function.
2.) Application with Polyester Substance in its Surface.
3.) Implement of Reflect: Made of High Purity Aluminum.
4.) Cover: High Strength and High Transparent Toughened Glass
5.) Fastener Bolt and Screws: Stainless Steel
6.) Arm Diameter: 60mm
7.) IP65
2). Solar Panel Description With 25Years Life Span:
We could ensure the conversion efficiency of solar panel with high efficiency Mono/Sunpower cells and Adding Aluminum Frame, Tempered Glass.
3). Lithium( LiFePO4) Battery With >5Years Life Span:
Lithium battery is able to bear overfull charge or overfull discharge, able to bear shaking,shock resistance, Long storage life. no need add acid or water to maintenance it,No acid mist, Environmental Friendly.
4). Controller Description :
*protection grade: IP68, effective dust-proof and water-proof
*Type:PWM For good Sun Condition Area like Africa & MPPT wtih high efficiency for countries like Canada with bad sun condition in winter.
*Single and double street light output control flexible
*Dimmable &Human Sensor are avaliable.
*LED status indicate
3. Customized service included:
4. 6W-80W All In One Integrated Solar Led Street Light specification
All In One Solar Street Light(6W-80W) | ||||||
Specification | 6W | 15W | 30W | 60W | 80W | |
Solar Panel | Max Power(18V) | 12W | 30W | 60W | 80W | 110W |
Brand | Made in China | Sunpower Made in USA | ||||
Life Time | 25 Years | |||||
Battery | Type(Lithium 12.8V) | 5AH | 12AH | 24AH | 33AH | 56AH |
Life Time | 8 Years | |||||
Led Lamp PIR Motion Sensor | Max Power(12V) | 6W | 15W | 30W | 60W | 80W |
Lumen(LM) | 660-780 | 1650-1950 | 3300-3900 | 6600-7800 | 8800-10400 | |
LED Chip | Epistar Made in Taiwan | Bridgelux Made in USA | ||||
Viewing Angle | 120° | |||||
Life Time | 100000 Hours | |||||
Charge Time | By Sun | 6Hors | 6Hors | 6Hors | 8Hors | 10Hors |
Discharge Time | Full Power Mode | >10Hors | >10Hors | >12Hors | >15Hors | >17Hors |
Saving Power Mode | >20Hors | >20Hors | >25 Hors | >30Hors | >34Hors | |
Working Temperature | Range( ºC ) | -20ºC~+70ºC | ||||
Color Temperature | Range(k) | 6000k-6500k | ||||
Mounting Height | Range (m) | 3-4 | 5-6 | 7-8 | 7-9 | 9-10 |
Space Between Light | Range (m) | 8-10 | 15-20 | 25-30 | 30-40 | 40-50 |
Main Material | Aluminium Alloy | |||||
Certificate | CE / ROHS / IP65/ISO9001 | |||||
Warranty Period | 5 Years |
5.Aplications:
Garden/resydential area/courtyard/road/mine area/parking area.
6.The following are tips and directions for all in one solar street light, please pay attention!
1."All in One solar street light" could not work without sunshine, please select the suitable model according to the local sunshine radiation and the annual total radiation.We suggest use the both AC and DC charging model in those places where lack of sunshine or have long-time rainy days.
2."All in One solar street light" adopts the long life Lithium battery for storing energy, charging temperature at day time is between: -20°C~+70°C,when temperature goes lower than -20°C ,the control system will stop automatically to protect the battery, and it will revive to charge the battery while temperature goes higher than -20°C. Discharging temperature at night is between: -20°C~+70°C, any ambient beyond will take damage to the battery. So please check these factors while selecting the street light.
3.Battery of the "All in One solar street light" can be stored for 6 months long after fully charged. Therefore please examine and charge it periodically after long time transportation or storage to prevent damaging.
4.When install the lights in Northern Hemisphere, please adjust the solar panel to the South as much as possible to collect maximum sunshine radiation, while install them in Southern Hemisphere, By the same token, keep solar panel to north. At the same time please keep it away from any shadow of houses, trees etc
.
5.Keep clear of the surface of the All in One solar street light with normal detergent to get maximum power generation, clear the dust or tree leaves or any grease.
6.All in one solar street light have got the standard of IP65.The vents on the surface is designed for radiating.The materials are made of aluminum alloy which can survive in the environment of seaside and desert.
7.The knob of the fuse is at the left rear end of the light, please insert the fuse while using.By the way,there is one piece of fuse more as backup.(If not fuse,then it is switch,just turn on the switch).
7.Company introduce
Shenzhen HXXY Tech .Co., Ltd was established in 2009,which is a professional manufacturer and exporter that is concerned with the design, development and production of integrated solar light and other solar products.The headquarters set up in Hongkong .And our biggest factory are located in ShenZhen City ,with convenient transportation access.Our company has expanded from Shenzhen to other city like zhongShan to have other factories and offices.Our main products are integrated solar street light, solar garden light solar camping light solar lawn light ,solar power systems,led products and so on .All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Covering an area of 4600 square meters, we now have over 300 employees, our company own professional R&D team and sales team.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee total customer satisfaction.Besides, we have received CE ROHS IP65 and ISO9001:2008 Certificates .
8.Shipping ways and payment
1.FedEx/DHL/UPS/TNT for samples, Door-to-Door;
2.By Air or by Sea for batch goods, for FCL;Airport Port receiving;
3.Customers specifying freight forwarders or negotiable shipping methods;
Trade terms:
Q: What should be done at first before install?
R: Firstly, Once you recieved it, pls check the complete pacel, and test light's basic function---lighting, to confirm it can work perfectely.
Secondly, Considering the security, We didn't charge the battery full before shiping the all in one/integrated solar street light to you, so pls charge the light at daytime for 3 days without lighting/discharging at night.
Thirdly, pls remove the plastic wrap on the light source,and then instal.
Q: How to install?
R: Fix the product with a right angle, keep the solar panel face the sky, and make sure no shelter on the surface of solar panel.
Q: What to do with the Rainy day or Cloudy day?
R:The all in one/integrated solar street light is Rainyproof---Waterproof grade: IP65.
After fully charged, the battery can keep the LED working in several rainy/ cloudy days.
Thank you for your attention! Please send inquiry or contact me for further information.