Products

DIN 741 Malleable Wire Rope Clips

China DIN 741 Malleable Wire Rope Clips, Find details about China U-Bolt Clamp, U-Bolt Clip from DIN 741 Malleable Wire Rope Clips

Model NO.
WRCD
Origin
China
HS Code
7326909000
Model NO.
WRCD
Origin
China
HS Code
7326909000

H-Lift DIN 741 MALLEABLE WIRE ROPE CLIPS
1. Wire rope clips help secure wire rope ends.
2. Wire Size Max: 3MM-50MM
3. Material: Malleable
4. Surface treatment: Galvanized or hot dip galv
 
ITEMSIZEDimensions Weight
ABCDEFGkg
WRCD033MM9101241021160.008
WRCD055MM11111351023190.014
WRCD066.5MM13121551126230.0165
WRCD088MM16141961530280.026
WRCD1010MM19182281734340.056
WRCD1111MM20192281836360.059
WRCD1313MM242330102142450.108
WRCD1414MM252330102244470.12
WRCD1616MM292633122650510.18
WRCD1919MM322938123054630.225
WRCD2222MM373344143461710.335
WRCD2626MM413545143765810.42
WRCD3030MM483750164374940.6
WRCD3434MM5242551650801040.72
WRCD4040MM5845601655881240.88

DIN 741 Malleable Wire Rope Clips

DIN 741 Malleable Wire Rope Clips

Frequently Asked Questions

Q1. How often should lifting equipments be subject to thorough examantions?

Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.

Q2. What is a competent person ?

A competent person is someone who has appropriate practical and theoretical knowledge and experience of the equipment for which they act as 'competent person'. This knowledge and experience can help them detect defects / weaknesses and assess whether they will affect the continued safe use of the equipment.

Q3. Does new lifting equipment have to be thoroughly examined before use ?

You must have lifting equipment examined in the following circumstances:

Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use


 

You Might Also Like