R55 R26 R38 R33 R08 S21 S42 Rubber Pump Parts
China R55 R26 R38 R33 R08 S21 S42 Rubber Pump Parts, Find details about China Water Pump Impeller, Pump from R55 R26 R38 R33 R08 S21 S42 Rubber Pump Parts
Rubber Slurry Pump Spares
Naipu® Rubber Pump Parts mainly contain Impeller, Cover Plate Liner,Frame Plate Liner,Throat Bush ,Back Liner.Lower Strainer,Suction Gasket,Discharge Gasket,End Cover Gasket etc.
The material of the rubber parts
1.RU08,RU26 Natural rubber, apply for impeller
2.RU33,Natural Rubber,mainly used for cyclone liner,pump lining,impeller etc.
3.RU38,Natural Rubber,mainly used in impeller.
4.RU55,Natural Rubber,mainly used in impeller and lining etc.
5.We also can do S01,S10,S12,S21,S42,U01,S44,S50,Y08 etc.
Features
The rubber parts are wear resistant and corrosion resistant, usually used for acid working conditions,such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bush, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts material is natural rubber, synthetic rubber, EPDM Rubber, Nitrile Rubber, Fluororubber or any other as requests,which guarantees excellent performance including wear resistance, chemical resistance , waterproof and higher operating temperature range from -40-75ºC.
The Rubber impeller dimension is same with High Chrome Alloy Impeller. We also could provide Rubber Slurry Pump with Metal Impeller. Impeller is the most important spare parts of a Centrifugal Slurry Pump. Centrifugal pumps need impeller to produce the centrifugal force which processing the slurries. The centrifugal force is generated by the impeller when it runs to a certain speed.
Rubber Pump Liners: Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Product Overview:
Other Pump Parts
Naipu® Metal Slurry Pump contains Impeller,Throat Bush ,Frame Plate Liner Insert,Frame Plate ,Cover Plate,Expeller,Expeller Ring, Shaft,Shaft Sleeve,Frame,Bearing Assembly,Stuffing Box,Lantern Ring,Lantern Restrictor,Grease Retainer etc.
The material of our wet end parts is A05,A49,A51(A53),A61 etc.
The material of shaft sleeve and Shaft Spacer is C21;
The material of the Cover Plate,Frame plate,bearing body,frame is D21;
The material of the Gland Assembly is D81;
The material of the shaft and shaft key is E05;
The material of the Frame,bearing body, Cover Plate ,Frame Plate,Grease Retainer,Lower Strainer is HT200;
The material of the Shaft Sleeve can be J04,J05.
OEM Pump Parts
For the Non standard parts, We can do OEM pump parts if you supply us drawing or samples.
For the special materials,we can do Hastelloy alloy,Alloy 20 parts,A61 parts,Polyurethane parts U01,U38;Fluororubber;Ceramic coated parts etc.
Our Main Pump Types
| Naipu Main Pump Series | ||||||
| AH Series | HH Series | SP Series | G series | AF Series | L Series | M series |
| 1.5/1B-AH(R) | 1.5/1C-HH | 40PV-SP(R) | 6/4D-G | 3QV-AF | 20A-L | 10/8R-M |
| 2/1.5B-AH(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 4RV-AF | 50B-L | 10/8E-M |
| 3/2C-AH(R) | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF | 75C-L | |
| 4/3C-AH(R) | 4/3X-HH | 150SV-SP(R) | 12/10G-G | 8SV-AF | 100D-L | |
| 6/4D-AH(R) | 6/4X-HH | 200SV-SP(R) | 14/12G-G | 150E-L | ||
| 6/4E-AH(R) | 6/4F-HH | 250TV-SP | 14/12T-G | 300S-L | ||
| 8/6E-AH(R) | 6S-H | 16/14TU-GH | 350FF-L | |||
| 8/6R-AH(R) | 6S-HP | 18/16G-G | 450ST-L | |||
| 10/8F-AH(R) | 8/6S-H | 18/16TU-GH | ||||
| 10/8ST-AH(R) | 8/6S-HP | |||||
| 12/10ST-AH(R) | 8/6X-HP | |||||
| 12/10FF-AH(R) | ||||||
| 14/12G-AH(R) | ||||||
| 14/12ST-AH(R) | ||||||
| 16/14TU-AH(R) | ||||||
| 20/18TU-AH(R) | ||||||
Naipu Workshop
NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.
NAIPU advanced Inspection Facilities
We have established a strict QA and QC system,we can provide quality control records such as "Spectrum Detection" "Metallographic Microscope Inspection" "Block Test" "Ultrasonic Flaw Detection" " Penetration Testing"etc. And related test reports to our clients if necessary, such as " Material Test Report " " Dimensional Test Report " " Rotor Balancing Test Report " " NDT Test Report " " Hardness Inspection Report " etc.
Our Service
1. Quick Reply
Your inquiry related to our products or prices will be
replied within 12 hours.
2.Pump Choice .
Please let us know the application, capacity and head ,We can help to select the suitable pump
3.Technical Surport .
We have a group of high quality technicians with rich experience who can solve everything during the whole process.
4.Guarantee quality.
All the products have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly before delivery. For Comon parts(except wet end parts,) waranty time: 1 years
5.Perfect after -sales .
We will be responsible for the whole life period
6.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.Steely alloy.
Welcome to contact us
Shijiazhuang Naipu Pump Co.,Ltd
Shijiazhuang Headquarters,
No.368 Xinshi North Road,Shijiazhuang,China.
Contact Person: Karen Tan
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine