Full Automatic Pet Bottle Blow Moulding Machine Bottle Making Machine
China Full Automatic Pet Bottle Blow Moulding Machine Bottle Making Machine, Find details about China Blow Moulding Machine, Bottle Blowing Machine from Full Automatic Pet Bottle Blow Moulding Machine Bottle Making Machine
Basic Info.
Model NO.
ROY-4B
Model
Roy-B4
Product
Bottle Blow Moulding Machine
Bottle Type
Round/Square Bottle
Bottle Size
100ml-2L
Capacity
2000-4000 Bottles/Hour
Controlled by
PLC (Mitsubishi)
Warranty
1 Year
Size
1908*1858*1920mm
Trademark
ROYAL
Transport Package
Wooden Case
Specification
2000kg
Origin
Zhangjiagang City, Jiangsu Province, China
HS Code
8477309000
Model NO.
ROY-4B
Model
Roy-B4
Product
Bottle Blow Moulding Machine
Bottle Type
Round/Square Bottle
Bottle Size
100ml-2L
Capacity
2000-4000 Bottles/Hour
Controlled by
PLC (Mitsubishi)
Warranty
1 Year
Size
1908*1858*1920mm
Trademark
ROYAL
Transport Package
Wooden Case
Specification
2000kg
Origin
Zhangjiagang City, Jiangsu Province, China
HS Code
8477309000
Product Desciption
Full Automatic pet Bottle Blow moulding Machine bottle Making machine
General Introduction:
Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install\test and start up.
14). Low rejection rate: Less than 0.2 percent.
Technique Parameter of Automatic PET bottle blowing machine.
Parametric Technology:
Machine Images
bottle moulds
Auxiliary machines
Flow Diagram
GUARANTEE YOUR FUNDS TO BE SAFE AND DELIVERY TO BE ON TIME!
>>Through ALIBABA insurance guarantee service, it will ensure you to deliver on time and the quality of the equipment you want to buy.
>>By LC, you can lock the delivery time easily.
>>After visiting factory, you can ensure the authenticity of our bank account.
GUARANTEE BEST QUALITY!
>>In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
>>Each component before assembly needs strictly control by inspecting personnel.
>>Each assembly is in charged by a master who has working experience for more than 5 years
>>After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory
GUARANTEE BEST AFTER-SALE SERVICE!
>>After finish the production, we will test the production line, take photos, videos and send them to customers
>>After the commissioning, we will package the equipment by standard export package for shipment.
>>According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
>>Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project for five years.
Pre-sales Q&A
1.Are you a trading company or a manufacturer?
We are a manufacturer with more than 12 years experience supply the factory price machine with good quality, welcome to visit !
2.Do you have reference project?
We have reference project in most countries,If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
And you are always welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
Contact our sales people you can get video of our reference running machine
3.Do you have agent and after-service stations?
So far we have agent in America, Colombia, Dubai ,Thailand, Indonesia,Maylasia welcome to join us!
4.Do you have any certificate?
we have been certificated by the famous cercification authority CE,ISO,SGS9001.
5.Do you provide turnkey project?
Turnkey project available We can help you to start a new company in beverage making.Pls contact with our sales people.
6.Do you provide customized service?
we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
7.What's your guarantee or the warranty of the quality if we buy your machines?
We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Sale Q&A
1.What's your payment term?
We accept 30% deposit 70%TT before shipment by TT/LC/Western union
2.What's your delivery term?
We provide EXW,FOB,CFR,CIF delivery terms
3.How to test machine before delivery?
Machines testing running , and sending testing videos.
4.How about the Packaging details?
Standard export packing, major products using export plywood case packing, small products use thick carton packing, ensure that the product packaging integrity and safety;
After sales Q&A
1.When can I get my machine after I paid?
Normally production time is around 30 -60days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
2.How to install my machines when it arrives?how much the cost?
We will send our engineers to your factory to install the machines and train your staff how to operate the machines. Customer pay round airtickets,engineer visa cost,accommodation and engineer salary USD100/day/person.
3.When can i get engineers from you?
When you finish the Preparation conditions(water resource,electricity,air supply,production materials)contact with our sales people we will dispatch engineer to install the machine for you ,and train your employees to use the machine well.Normally when you preparation is done,you contact with our sales people and cooperate us to get the visa for the engineer and our engineer will be there within 15 days.
4.How long time for installation?
According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.
5.How about the spare parts?
We will send one year enough easy broken spare parts together with the machines,shipping together.During the warranty time,we will supply the spare parts with our cost including the delivery fees.
Welcome to inquiry us and visit our factory!
General Introduction:
Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: Automatic and manual.
10). Safe\reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost\high efficiency\easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install\test and start up.
14). Low rejection rate: Less than 0.2 percent.
Technique Parameter of Automatic PET bottle blowing machine.
Parametric Technology:
Model | ROY-B4 | |
Productivity | Depend on bottle design | 3200-4000PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm | |
Neck diameter | 15mm-38mm | |
Mold | Cavity | 4cavities |
Mold thick | 240mm | |
Mold | 500*500mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 49kw | |
Really use power | 14kw | |
Air source | LP air compressor | 1.6m3/min 1.0MPa 1set (15KW) |
HP air compressor | 1.0m3/min 3.0MPa 2sets (each set 11KW) | |
Air dryer | 2.0m3/min 3.0MPa 1set | |
Cooling water | Cooling water | 15L/min |
Size | L*W*H | 1908*1858*1920mm |
Weight | 3600kg | |
Auxiliary equipment (preform unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg | |
Resin available | PET | |
Machine Images
bottle moulds
Auxiliary machines
Flow Diagram
GUARANTEE YOUR FUNDS TO BE SAFE AND DELIVERY TO BE ON TIME!
>>Through ALIBABA insurance guarantee service, it will ensure you to deliver on time and the quality of the equipment you want to buy.
>>By LC, you can lock the delivery time easily.
>>After visiting factory, you can ensure the authenticity of our bank account.
GUARANTEE BEST QUALITY!
>>In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.
>>Each component before assembly needs strictly control by inspecting personnel.
>>Each assembly is in charged by a master who has working experience for more than 5 years
>>After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory
GUARANTEE BEST AFTER-SALE SERVICE!
>>After finish the production, we will test the production line, take photos, videos and send them to customers
>>After the commissioning, we will package the equipment by standard export package for shipment.
>>According to the customer's request, we can arrange our engineers to customers' factory to do the installation and training.
>>Engineers, sales managers and after-sales service manager will form a after-sales team, online and off line, to follow the customers' project for five years.
Pre-sales Q&A
1.Are you a trading company or a manufacturer?
We are a manufacturer with more than 12 years experience supply the factory price machine with good quality, welcome to visit !
2.Do you have reference project?
We have reference project in most countries,If we get the permission of the customer who has brought the machines from us ,we can tell you their contact imformation,you can go to vist their factory.
And you are always welcome to come to visit our company,and see the machine running in our factory,we can pick you up from the station near our city.
Contact our sales people you can get video of our reference running machine
3.Do you have agent and after-service stations?
So far we have agent in America, Colombia, Dubai ,Thailand, Indonesia,Maylasia welcome to join us!
4.Do you have any certificate?
we have been certificated by the famous cercification authority CE,ISO,SGS9001.
5.Do you provide turnkey project?
Turnkey project available We can help you to start a new company in beverage making.Pls contact with our sales people.
6.Do you provide customized service?
we can design the machines according your requirements(materil ,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
7.What's your guarantee or the warranty of the quality if we buy your machines?
We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Sale Q&A
1.What's your payment term?
We accept 30% deposit 70%TT before shipment by TT/LC/Western union
2.What's your delivery term?
We provide EXW,FOB,CFR,CIF delivery terms
3.How to test machine before delivery?
Machines testing running , and sending testing videos.
4.How about the Packaging details?
Standard export packing, major products using export plywood case packing, small products use thick carton packing, ensure that the product packaging integrity and safety;
After sales Q&A
1.When can I get my machine after I paid?
Normally production time is around 30 -60days,the exactly depend on what kind of machine you order.The shipping time is based on your destination port.
2.How to install my machines when it arrives?how much the cost?
We will send our engineers to your factory to install the machines and train your staff how to operate the machines. Customer pay round airtickets,engineer visa cost,accommodation and engineer salary USD100/day/person.
3.When can i get engineers from you?
When you finish the Preparation conditions(water resource,electricity,air supply,production materials)contact with our sales people we will dispatch engineer to install the machine for you ,and train your employees to use the machine well.Normally when you preparation is done,you contact with our sales people and cooperate us to get the visa for the engineer and our engineer will be there within 15 days.
4.How long time for installation?
According your machines order,we will send one or two engineers to your plant,it will take about 10 days to 25 days.
5.How about the spare parts?
We will send one year enough easy broken spare parts together with the machines,shipping together.During the warranty time,we will supply the spare parts with our cost including the delivery fees.
Welcome to inquiry us and visit our factory!
You Might Also Like
LED Flood Light for Outdoor with CCTV Camera
Low Viscosity Epoxy Acrylate He421c Fast Curing Rate Good Ye......
Dymind Hematology Reagents Dh56 Dh76 Dh71 Ly Lyse Diluent
HID HPS CFL Mhl Replacement 27W LED Street Corn Light
California White Stain Finish Color Chain Winder Awning Wind......
Push Male Elbow Spl4-03 Union Pneumatic Fittings Stainless S......
Fast Speed Large Capacity Battery Pack Handheld Battery Rive......
Gr400f /904kw/3 Phase/Brushless Alternator for Generator Set......
High Quality CE Certification Temperature Humidity Vibration......
Complete Alcohol/Ethanol Distillation Equipment Alcohol/Etha......
Chinese Top Brand Sinotruk HOWO 4*2/6*4 Tract Truck Head Tra......
Wire Yellow/Green 16mm2 PVC Insulation Electric Wire 16mm2 W......