Specs
Features
HDD size
The amount of data that the hard drive can store.            3.5"
HDD capacity
The maximum storage capacity of the hard disk, usually measured in bytes e.g. GB.         14000 GB
HDD speed
The rotational speed of a hard disk expressed in rotations per minute. The faster the better.      7200 RPM
Interface
Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.      Serial ATA
Type
Characteristics of the device.      HDD
Storage drive buffer size              256 MB
HDD interface transfer rate         6 Gbit/s
HDD sustained transfer rate        248 MiB/s
Workload rate limit         550 TB/year
Mean time between failures (MTBF)
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.                2500000 h
Power
Power consumption (typical)
Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.              4.22 W
Power consumption (read)         7.8 W
Operating voltage
Defines the range of operating voltages available             5 / 12 V
Operational conditions
Operating temperature (T-T)
The minimum and maximum temperatures at which the product can be safely operated.             5 - 55 °C
Storage temperature (T-T)
The minimum and maximum temperatures at which the product can be safely stored.   -40 - 70 °C
Operational conditions
Operating relative humidity (H-H)            5 - 90%
Storage relative humidity (H-H) 5 - 95%
Operating vibration
Environmental requirements for vibration in operating mode     0.75 G
Non-operating vibration
Environmental requirements for vibration in non-operating mode           3 G
Operating altitude           -305 - 3048 m
Non-operating altitude -305 - 12192 m
Operating shock
Environmental requirements for optimal protection from impact in operating mode        70 G
Non-operating shock
Environmental requirements for optimal protection from impact in non-operating mode              250 G
Weight & dimensions
Width
The measurement or extent of something from side to side.      101.8 mm
Height
The measurement of the product from head to foot or from base to top.             26.1 mm
Depth
The distance from the front to the back of something.   147 mm
Weight
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.          720 g