• Threads in warp 10cm                   100±5/10cm
• Threads in welf 10cm                    70±4/10cm
• Sinking time                            ≤10sec
• Absorption capacity                        ≥10g/g
• pH pH                                        5.0~8.0
• Surface-active substances             ≤2mm
• Ether-soluble substances               <0.5%
• Water-soluble substances               <0.5%
• Sulphated ash                         <0.4%
• Fluorescence                     None,it displays only a slight
• Whiteness                                    ≥80⁰ 
• Whiteness after sterile                   ≥75⁰ 
• Extractable coloring matter                 None
• Starch and dextrin                        None
• Latex                                         None
• Bisphenol A                                 None 
• Phtalates                              None 
• PVC                                     None 
• Animal or Biological product            None 
• Drying loss                              <8%  
• Minimum mass                         23±0.5g/m²  
• Minimum breaking load warp       ≥50N/5cm
• Minimum breaking load weft       ≥30N/5cm
• Contents                                    100% cotton
• Before sterilization Bacteria and fungi      less then100cfu/g
• After sterilization Bacteria and fungi        None
   
   

PRODUCTION LINE







WAREHOUSE

Hubei V-Medical Products Co., Ltd (called as V-Medical), established in August, 2004, which is joint-ventured by Kaitaijia(Beijing,China), Raffin(France) and Nissan(Israel), is one professional manufacturer all kinds of medical dressing.

V-Medical located in Xiantao, Hubei, covering about 40,000 sqm of land and over 30,000 sqm building area, which the highlight point is all workshops graded as 100,000 class cleaning room, total area over 10,000 sqm. The sterilization center's daily capacity is over 110 cubic meters. The laboratory and testing center can work through most of testing subjects, such as EO residual, positive control, microbial and sterility testing,etc.

V-Medical focuses on the medical kits and packs, such as different kinds of medical dressing kits, surgical kits and first-aid kits, all sorts of gauze (spunlace non-woven) roll/swab/ball/lap sponge, surgical gowns, isolation gowns, face masks,bandages and surgical towel and so on. All the products has been exported into the whole world market, highlighted in the European and Middle east markets.

V-Medical has been certified by ISO13485, ISO11135, ISO14000, which the CE certification covers over 40 kinds of products. At the same time, V-Medical registered over 10 sorts of products in FDA. For the domestic market, our V-Medical obtained the Medical device production license, while registered in CFDA for the disposal first aid kits, the disposal surgical kits, medical and surgical face mask.

Since our foundation, V-Medical constantly insist on the management philosophy: Loyalty and Dedication, Innovation and Pragmatism, Processing and Delicacy, to be standardized as one leading and professional medical dressing manufacture.


V-Medical will chase on helping people living much more healthy all the time.

Hubei V-Medical Products Co., Ltd (called as V-Medical), established in August, 2004, which is joint-ventured by Kaitaijia(Beijing, China), Raffin(France) and Nissan(Israel), is one professional manufacturer all kinds of medical dressing. 

V-Medical located in Xiantao, Hubei, covering about 40, 000 sqm of land and over 30, 000 sqm building area, which the highlight point is all workshops graded as 100, 000 class cleaning room, total area over 10, 000 sqm. The sterilization center′s daily capacity is over 110 cubic meters. The laboratory and testing center can work through most of testing subjects, such as EO residual, positive control, microbial and sterility testing, etc. 

V-Medical focuses on the medical kits and packs, such as different kinds of medical dressing kits, surgical kits and first-aid kits, all sorts of gauze (spunlace non-woven) roll/swab/ball/lap sponge, surgical gowns, isolation gowns, face masks, bandages and surgical towel and so on. All the products has been exported into the whole world market, highlighted in the European and Middle East markets. 

V-Medical has been certified by ISO13485, ISO11135, ISO14000, which the CE certification covers over 40 kinds of products. At the same time, V-Medical registered over 10 sorts of products in FDA. For the domestic market, our V-Medical obtained the Medical device production license, while registered in CFDA for the disposal first aid kits, the disposal surgical kits, medical and surgical face mask. 

Since our foundation, V-Medical constantly insist on the management philosophy: Loyalty and Dedication, Innovation and Pragmatism, Processing and Delicacy, to be standardized as one leading and professional medical dressing manufacture. 

V-Medical will chase on helping people living much more healthy all the time.