4 X 10gbps Qsfp+ Direct Attach Cables

China 4 X 10gbps Qsfp+ Direct Attach Cables, Find details about China Qsfp+ Cable, SFP Cable from 4 X 10gbps Qsfp+ Direct Attach Cables

Basic Info.

Model NO.

TK-QSFP+

Operating Case Temperature

0 ~ +70ºC

Power Supply Voltage

3.14~3.47

Trademark

takfly

Specification

CE ROSH

Origin

Shenzhen

HS Code

854470000

Model NO.

TK-QSFP+

Operating Case Temperature

0 ~ +70ºC

Power Supply Voltage

3.14~3.47

Trademark

takfly

Specification

CE ROSH

Origin

Shenzhen

HS Code

854470000

Product Desciption

4 x 10Gbps QSFP+ Direct Attach Cables

Features

QSFP+ conforms to the Small Form Factor SFF8436
4-Channel Full-Duplex Active Copper Cable Transceiver
Support for multi-gigabit data rates :1.0 Gbps - 10.3125 Gbps (per channel)
Maximum aggregate data rate: 41.25 Gbps (4 x 10.3125Gbit/s)
Maximum throughput: 82.5 Gbps (Tx and Rx)
Copper link length up to 10m (active limiting)
High-Density QSFP 38-PIN Connector
Power Supply :+3.3V
Low power consumption: 1.5 W (typ.)
Low crosstalk
I2C based two-wire serial interface for easy control and monitoring
(management interface acc. SFF-8436)
Temperature Range: 0~ 70 °C
ROHS Compatible

Applications

Local Area Networks (LAN)

10 Gigabit Ethernet
40 Gigabit Ethernet

High Performance Computing (HPC)

InfiniBand SDR, DDR, QDR
2.5, 5 Gigabit PCI-Express Extension
Proprietary Interconnect

Storage Area Networks (SAN)

2, 4, 8, 10 Gigabit Fiber Channel
Fiber Channel over Ethernet
SAS
Supported Standards
SFF-8436 (SFF Committee QSFP document)
QDR 10G InfiniBand
IEEE P802.3ba (Ethernet)
8GFC & 10GFC (Fiber Channel)

Product Description
The QSFP+ cable assemblies are high performance, cost effective I/O solutions for 40G LAN, HPC and SAN applications. QSFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet , InfiniBand and Fiber Channel industry standard requirements for performance and reliability..

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Storage Ambient Temperature		-40		+85	°C
Operating Case Temperature	Tc	0		+70	°C
Power Supply Voltage	VCC3	3.14	3.3	3.47	V
Power Dissipation	PD			1.5	W

Systems

Performance	10.3125 Gbps(per channel) line speed, full duplex Bit error rate: better than 10E-12
Media	Hot-pluggable, industry-standard Small Form-Factor Pluggable(QSFP+) copper cable, available up to 10m
Operating parameters	Supply voltage: 3.3V Power consumption(per end): max 1.5W

Supported Length

Up to 10m typical & customer specific requirements

QSFP+ Host Board Schematic for passive copper cables

Pin Descriptions

Pin	Logic	Symbol	Name/Description	Notes
1		GND	Ground	1
2	CML-I	Tx2n	Transmitter Inverted Data Input
3	CML-I	Tx2p	Transmitter Non-Inverted Data Input
4		GND	Ground	1
5	CML-I	Tx4n	Transmitter Inverted Data Input
6	CML-I	Tx4p	Transmitter Non-Inverted Data Input
7		GND	Ground	1
8	LVTTL-I	Mod SelL	Module Select
9	LVTTL-I	Reset	Module Reset
10		Vcc Rx	+3.3V Power Supply Receiver	2
11	LVCMOSI/O	SCL	2-wire serial interface clock
12	LVCMOSI/O	SDA	2-wire serial interface data
13		GND	Ground	1
14	CML-O	Rx3p	Receiver Non-Inverted Data Output
15	CML-O	Rx3n	Receiver Inverted Data Output
16		GND	Ground	1
17	CML-O	Rx1p	Receiver Non-Inverted Data Output
18	CML-O	Rx1n	Receiver Inverted Data Output
19		GND	Ground	1
20		GND	Ground	1
21	CML-O	Rx2n	Receiver Inverted Data Output
22	CML-O	Rx2p	Receiver Non-Inverted Data Output
23		GND	Ground	1
24	CML-O	Rx4n	Receiver Inverted Data Output
25	CML-O	Rx4p	Receiver Non-Inverted Data Output
26		GND	Ground	1
27	LVTTL-O	ModPrsL	Module Present
28	LVTTL-O	IntL	Interrupt
29		Vcc Tx	+3.3V Power supply transmitter	2
30		Vcc1	+3.3V Power supply	2
31	LVTTL-I	LPMode	Low Power Mode
32		GND	Ground	1
33	CML-I	Tx3p	Transmitter Non-Inverted Data Input
34	CML-I	Tx3n	Transmitter Inverted Data Input
35		GND	Ground	1
36	CML-I	Tx1p	Transmitter Non-Inverted Data Input
37	CML-I	Tx1n	Transmitter Inverted Data Input
38		GND	Ground	1

Note 1: GND is the symbol for signal and supply (power) common for the QSFP+ module. All are common within the QSFP+ module and all module voltages are eferenced to this potential unless otherwise noted. Connect these directly to the host board signal-common ground plane.
Note 2: Vcc Rx, Vcc1 and Vcc Tx are the receiver and transmitter power supplies and shall be applied concurrently. Requirements defined for the host side of the Host Edge Card Connector are listed in Table 6. Recommended host board power supply filtering is shown in Figure 4. Vcc Rx Vcc1 and Vcc Tx may be internally connected within the QSFP+ Module in any combination. The connector pins are each
rated for a maximum current of 500 mA.

QSFP+ Memory Map

Ordering information

Part Number	Product Description
GQS-C768-XXC	4 x 10Gbps QSFP+ Direct Attach Cables, up to 10m (24AWG),0ºC ~ +70ºC

Products

4 X 10gbps Qsfp+ Direct Attach Cables

You Might Also Like

Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......

GMP Factory Supply Food Grade Phycocyanin Spirulina Extract

Table Tennis Racket with Rubber + Bag Ping Pong Bat

3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising

Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......

Portable Glass Shape Edge Polishing Machine

A4 A3 Paper Wrapping Machine

Stainless Steel Angle Tube Strainer

Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips

Warehouse Tent Made by Superb Tent

Thyristor Rectified CO2 MIG Mag Arc Welding Machine