Products

Dyeing and Finishing Machine Heat-Setting Stenter

China Dyeing and Finishing Machine Heat-Setting Stenter, Find details about China Stenter, Textile Finishing Machine from Dyeing and Finishing Machine Heat-Setting Stenter

Model NO.
FSLD
Warranty
1 Year
Customized
Customized
Condition
New
Chamber
4
Chamber Length
12m
Speed
3~30m/Min
Power
110kw
Setting Room Temperature
220ºC
Oil Heating Capacity
80X10000 Kcal/H
Natural Gas Supply
120 Cbm/H
Trademark
FINESTART
Transport Package
FCL
Specification
32300*4620*1750mm
Origin
Jinan, China
HS Code
84518000
Model NO.
FSLD
Warranty
1 Year
Customized
Customized
Condition
New
Chamber
4
Chamber Length
12m
Speed
3~30m/Min
Power
110kw
Setting Room Temperature
220ºC
Oil Heating Capacity
80X10000 Kcal/H
Natural Gas Supply
120 Cbm/H
Trademark
FINESTART
Transport Package
FCL
Specification
32300*4620*1750mm
Origin
Jinan, China
HS Code
84518000

FSLD Heat-Seting Stenter Machine

Dyeing and Finishing Machine Heat-Setting Stenter
Introduction
 
The Stenter Machine is used for cotton, chemical fiber and blended knitted and woven fabric open width padding auxiliaries, drying and styling process.

 According to the width of the fabric, we can offer the following models:
 FSLD-1600/1800/2000/2200/2400/2600/2800/3000/3200/3400/3600/3800/4000
 The machine is equipped with horizontal rollers, the diameter is from 360mm to 400mm based on the machine  width of 3000mm or wider.

Design Drawing
Dyeing and Finishing Machine Heat-Setting Stenter

Functions of Stenter Machines

  1. Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric.
  2. Width of the fabric is controlled by the stenter.
  3. Finishing chemical apply on fabric by the stenter.
  4. Loop of the knit fabric is controlled.
  5. Moisture of the fabric is controlled by the stenter.
  6. Spirility controlled by the stenter.
  7. GSM of the fabric is controlled by stenter.
  8. Fabric is dried by the stentering process.
  9. Shrinkage property of the fabric is controlled.
  10. Curing treatment for resin, water repellent fabric is done by the stenter.
Dyeing and Finishing Machine Heat-Setting Stenter

Main Parameter and Requirements
Brand NameFINESTART
ModelFSLD
OriginChina
Year of manufacture2017
Main Matching Fabric open width fabric (70~350g/m²) made
of cotton, cotton/polyester,wool,synthtic fiber and 
other blended fibers
Heat sourcenatural gas/circulating conduction oil/steam
Stentering typehot air circulating
Holding typepin+clip
Chain typepitch 60mm,oil-free lubricated
Rail typecarbon steel+polymer wearing strip
Working typehorizontal return chain 
Working width1000-3600mm
Working speed5-60m/min
Chamber Nos2-12
Chamber width3000mm
Insulating board thickness150mm
Temperature of chamber100~220ºC
Pinning & brush overfeed ratio-20%~40%
Temp.& Breadth adjustment typeseparately adjust on each chamber
Capacity of machine61.5kw+22.75kw*chamber*Nos
Standard machine power supply380V/3P/50HZ
Control power supply220V/24V
Steam specification of steam box3-6kg/cm²
Steam comsuption of steam box100-150kg/h
Compressed air 0.35-0.6MPa
Total weight14T+5.8T/chamber*Nos
 

Production Line
Dyeing and Finishing Machine Heat-Setting Stenter
Dyeing and Finishing Machine Heat-Setting Stenter



We welcome our customers to visit our factory and workshop. Further details will be offered upon your kind inquiry by following contact.

You Might Also Like