Products

Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter

China Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter, Find details about China Humidity Transmitter, Portable Gas Analyzer from Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter

Model NO.
CY-HT-LH331
Display Mode
4 Bits LED Display
Power Supply
AC100 ~ 240V 50/60Hz
Test Principle
Wet-Dry Oxygen Principle
Sample Gas Temperature
0 ~ 170ºC
Sampling Mode
Sample Gas Pass-in
Install Mode
Wall Mount
Trademark
CYKY
Transport Package
Wooden Case
Specification
110mmx220mmx250mm
Origin
Zhengzhou, China
Model NO.
CY-HT-LH331
Display Mode
4 Bits LED Display
Power Supply
AC100 ~ 240V 50/60Hz
Test Principle
Wet-Dry Oxygen Principle
Sample Gas Temperature
0 ~ 170ºC
Sampling Mode
Sample Gas Pass-in
Install Mode
Wall Mount
Trademark
CYKY
Transport Package
Wooden Case
Specification
110mmx220mmx250mm
Origin
Zhengzhou, China
Dry-wet Oxygen Principle Flue Gas Humidity Transmitter

Application of Flue Gas Humidity Transmitter:
It can be widely applied in the measurement and analysis of water vapor concentration in the flue gas before and after desulfurization and denitrification from heat-engine plant, chemical plant and iron and steel plant, etc.

Instrument features of Flue Gas Humidity Transmitter:
• The auto-compensation system for temperature with high accuracy could eliminate the influence from environment temperature;
• The function of pressure compensation with high accuracy could make the humidity measurement more accurate;
• The upper and lower limits of the humidity referred to 4-20mA,0-10V output can be set freely to help users getting the analog output with higher accuracy;
• The integrative design with built-in PID heat tracing function is easy to install and operate, and it can improve the analyzer's serving life and stability;
• It is with simple operation, long serving life and easy to maintain for features, etc.

Technical parameters of Flue Gas Humidity Transmitter:
Test principlewet-dry oxygen principle(ceramic humidity sensing)
Display mode4 bits LED display
Test range0 ~ 50/85(%VOL or Kpa)H2O
Accuracy≤±2%FS
Repeatability≤±1%
Response timeT90≤30S
Analog output4-20mA.DC(non-isolated output, loaded resistance lower than 500 Ohm)
 0-10V.DC(non-isolated output, loaded resistance higher than 10k Ohm)
1 way programmable alarm output (Dry contact type, maximum load 220VAC/2A)
Communication port RS232(default) or RS485
one way/ two way communication port, baud rate 4800, 9600, 19200bps optional
Power supplyAC100 ~ 240V 50/60Hz
Sample gas temperature 0 ~ 170ºC
Sampling modesample gas pass-in
Gas circuit port NPT 1/4 internal thread
Sample gas compositionno flammable gas, no strongly corrosive gas, the dust amount less than 1mg/Nm3
Appearance Size110mm×220mm×250mm(H×W×D)
Serving life>24 months (under normal use)
Install modewall mount
Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter
Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter

Founded in 2005, Zhengzhou CY Scientific Instrument Co., Ltd. is a company specializing in the development and production of laboratory technology research equipment. The products are mixed, pressed, burned, cut, ground, polished, coated, analytical equipment and related consumables. Products include laboratory sintering equipment, coating equipment and so on. At present, it has been exported to 25 countries and regions such as the United States, Europe, and Southeast Asia, and has been well received by various scientific research units.

We have a mature technology research and development team, the number of technicians is 33, the company has 150 people, more than 500 square meters of office space, the factory covers an area of about 1,500 square meters located in Zhengzhou High-tech Zone Electronic Industrial Park. The products are mainly located in the research market, serving scientific research in the labs of universities and colleges, and can also customize products according to your needs.

Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter
Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter
Dry-Wet Oxygen Principle Flue Gas Humidity Transmitter

Q. Are you a manufacturer or a trading company?

A. We are professional laboratory instrument manufacturers, have their own design team and factory, have mature technical experience, and can guarantee the quality of products and the optimal price.

Q. How is your company's product after-sales service system?

A. The product warranty period is 12 months, we can provide lifetime maintenance. We have professional pre-sales and after-sales departments that can respond to you within 24 hours to resolve any technical issues.

Q. How long is your delivery time? If I want to customize the instrument, how long does it take?

A.1. If the goods are in stock, it is 5-10 days. 2. We can provide customized services for our customers. It usually takes 30-60 days depending on the specifications of the custom instrument.

Q. Our country's power supply and plug are different. How do you solve it?

A. We can supply a transformer and plug according to your local requirements according to the power plug of different countries.

Q. How to pay?

A.T / T, L / C, D / P, etc., it is recommended to use Alibaba Trade Guarantee.

Q. How is the package of goods? Delivery methods?

A.1. Standard export fumigation sign wooden box packaging 2. Express, air, sea shipping according to customer requirements, find the most suitable way.

More questions, please contact customer service.

You Might Also Like