Products

Fgr12r Basic Freewheels for Assembly with Connecting Parts with Rollers

China Fgr12r Basic Freewheels for Assembly with Connecting Parts with Rollers, Find details about China Backstops, Overrunning Clutch from Fgr12r Basic Freewheels for Assembly with Connecting Parts with Rollers

Model NO.
FGR12R
Separated
Unseparated
Model
Fgr12r
Type
R
Precisiom
P6
Outside Diameter
62mm
Inside Diameter
12mm
Weight
0,5kg
Width
42mm
OEM
Accept
Package
Single Box or as Your Rrquirements
Port
Shanghai;Ningbo
Trademark
SUMA or OEM
Transport Package
Single Box or as Your Requirements
Specification
P6
Origin
Changzhou, Jiangsu, China
HS Code
84826000
Model NO.
FGR12R
Separated
Unseparated
Model
Fgr12r
Type
R
Precisiom
P6
Outside Diameter
62mm
Inside Diameter
12mm
Weight
0,5kg
Width
42mm
OEM
Accept
Package
Single Box or as Your Rrquirements
Port
Shanghai;Ningbo
Trademark
SUMA or OEM
Transport Package
Single Box or as Your Requirements
Specification
P6
Origin
Changzhou, Jiangsu, China
HS Code
84826000
Basic Freewheels FGR R
for assembly with connecting parts
with rollers
 
Features
Basic Freewheels FGR R are roller freewheels with ball bearings to be assembled with customer connecting parts. The freewheels are particularly suitable for installation in housings with oil lubrication and seals. The freewheels FGR R are used as:
 Backstops
 Overrrunning Clutches
 Indexing Freewheels
Nominal torques up to 68 000 Nm. Bores up to 150 mm.
 
Freewheel SizeTypeNominal t orque
MN
Nm		Max. speed
Inner ring freewheels/
overruns min-1		Outer ring freewheels/
overruns min-1		Bore d
mm		B
mm		C
mm		D
mm		E
mm		F
mm		G**H
mm		L
mm		T
mm		Z**Weight
kg
FGR12R552 5005 40012203,56220425,5 mm-425130,5
FGR15R1302 2004 80015282,0682547M 58525630,8
FGR20R1801 9004 10020342,4753055M 58576441,0
FGR25R2901 5503 35025352,4904068M 610607841,5
FGR30R5001 4003 05030432,41004575M 610688762,2
FGR35R7301 3002 85035452,91105080M 612749663,0
FGR40R1 0001 1502 50040532,91255590M 8148610864,6
FGR45R1 1501 1002 40045532,91306095M 8148611284,7
FGR50R2 1009502 05050643,915070110M 8149413287,2
FGR55R2 6009001 90055662,916075115M 101610413888,6
FGR60R3 5008001 80060785,417080125M 10161141501010,5
FGR70R6 0007001 60070956,419090140M 10161341651013,4
FGR80R6 8006001 400801003,9210105160M 10161441851018,2
FGR90R11 0005001 300901154,9230120180M 12201582061028,0
FGR 100R20 0003501 0001001205,4270140210M 16241822401043,0
FGR 130R31 0002509001301527,9310160240M 16242122781266,0
FGR 150R68 0002007001501806,9400200310M 203224636012136,0
 

Application example
Basic Freewheel FGR 25 R as a backstop on a reduction gear in the drive of an inclined conveyor of an assembly train. When the unit stops, the conveyor belt must be held securely so that it does not run backwards by the weight of the assembly parts. A brake disk is fitted to the outer ring of the freewheel alongside a manually operated brake calliper. The back driving torque is maintained by the freewheel and the closed brake. During set-up it must be possible to move the installation in both directions of rotation. To do this, the brake caliper is opened manually.
 
Mounting
The customer connecting parts are centered on the ball bearing external diameter F and
assembled via the outer ring. The tolerance of the shaft must be ISO h6 or j6 and the tolerance of the pilot diameter F of the connecting part must be ISO H7 or J7. The centering depth C must be observed.
 
Lubrication
An oil lubrication of the specified quality must be provided. Two flat seals are supplied for
sealing between the faces of the outer ring and the connecting parts.
 
Example for ordering
Freewheel size FGR 35, standard type:
? FGR 35 R

You Might Also Like